Butchers & Bicycles MK1-E Review

Butchers Bicycles Mk1 E Electric Bike Review
Butchers Bicycles Mk1 E
Butchers Bicycles Mk1 E Bosch Performance Line Geared Mid Motor Gates Carbon Belt Drive
Butchers Bicycles Mk1 E Covered Battery Compartment
Butchers Bicycles Mk1 E Bosch Intuvia Display And Control Pad
Butchers Bicycles Mk1 E Cargo Bin With Child Seats And Seatbelts
Butchers Bicycles Mk1 E Cup Holder Rain Fly
Butchers Bicycles Mk1 E Integrated Supernova Lights And Fenders
Butchers Bicycles Mk1 E Hydraulic Disc Brakes Spring Suspension
Butchers Bicycles Mk1 E Optional Nuvinci Continuously Variable Transmission
Butchers Bicycles Mk1 E Kid Hiding Inside Bike Bin Plastic Window
Butchers Bicycles Mk1 E Front Window On Cargo Bin
Butchers Bicycles Mk1 E Bosch 4 Amp Battery Charger
Butchers Bicycles Mk1 E Electric Bike Review
Butchers Bicycles Mk1 E
Butchers Bicycles Mk1 E Bosch Performance Line Geared Mid Motor Gates Carbon Belt Drive
Butchers Bicycles Mk1 E Covered Battery Compartment
Butchers Bicycles Mk1 E Bosch Intuvia Display And Control Pad
Butchers Bicycles Mk1 E Cargo Bin With Child Seats And Seatbelts
Butchers Bicycles Mk1 E Cup Holder Rain Fly
Butchers Bicycles Mk1 E Integrated Supernova Lights And Fenders
Butchers Bicycles Mk1 E Hydraulic Disc Brakes Spring Suspension
Butchers Bicycles Mk1 E Optional Nuvinci Continuously Variable Transmission
Butchers Bicycles Mk1 E Kid Hiding Inside Bike Bin Plastic Window
Butchers Bicycles Mk1 E Front Window On Cargo Bin
Butchers Bicycles Mk1 E Bosch 4 Amp Battery Charger

Summary

  • A top of the line, tadpole style cargo trike powered by the Bosch Performance mid-drive motor and an 11 speed SRAM drivetrain, optional NuVinci N360 or Harmony continuously variable transmission with Gates Carbon belt drive
  • The bike leans side to side so you can corner faster and avoid the two-wheel tipping experience of most other electric trikes, built in spring suspension and larger rear wheel cushion driver and cargo, puncture resistant tires reduce maintenance
  • Lots of cool options for the cargo box (clear cover for kids, bench seats with three-point seatbelts, infant carrier or a flat rain fly with snaps, clever cup holder "glove box" area near the handlebars locks and serves as a cover for the battery
  • Optional Supernova integrated lights that point where you steer, two color choices, brilliant front door system for easier loading of cargo, kids or pets (so you don't have to lift so high), the bike is cool but expensive and heavy

Video Review

Introduction

Make:

Butchers & Bicycles

Model:

MK1-E

Price:

$6,000 (Up to $7,400 with NuVinci Harmony, Hood with Skyview and Supernova E3 Lights)

Body Position:

Upright

Suggested Use:

Urban, Cargo

Electric Bike Class:

Pedal Assist (Class 1)
Learn more about Ebike classes

Warranty:

2 Years Comprehensive

Availability:

United States, Europe

Model Year:

2017

Bicycle Details

Total Weight:

115 lbs (52.16 kg)

Battery Weight:

5.7 lbs (2.58 kg)

Motor Weight:

8.8 lbs (3.99 kg)

Frame Material:

7005 T6 Hardened Aluminum Alloy, A4 Grade Stainless Steel Nuts and Bolts

Frame Sizes:

20 in (50.8 cm)

Geometry Measurements:

20" Seat Tube, 24.5" Reach, 23" Stand Over Height, 90" Length, 36" Width

Frame Types:

Mid-Step, Trike

Frame Colors:

Matte Black, Glossy White

Frame Fork Details:

Rigid CRMO Steel, 9 mm Quick Release Skewer

Frame Rear Details:

Steel Swing Arms

Attachment Points:

Bottle Cage Bosses, Rear Rack Bosses, Fender Bosses

Gearing Details:

11 Speed 1x11 SRAM GX, 10-42T, (Optional NuVinci N380 CVT with 380% Ratio Range, Optional NuVinci Harmony)

Shifter Details:

SRAM Triggers on Right (Optional Grip Shifter on Right for NuVinci)

Cranks:

Metropolis Alloy 170 mm Crank Arms, 20T Chainring (Optional 21T Sprocket for Gates CDX Belt Drive)

Pedals:

Alloy with Rubber Tread, Platform

Headset:

FSA Orbit, 1-1/8"

Stem:

Satori Easy-Up Telescoping with QR, 70 mm Range

Handlebar:

Alloy, Low Rise, 30 mm Rise, 27" Length

Brake Details:

Tektro Auriga SUB Hydraulic Disc with 160 mm Rotors (2 Front, 1 Rear), Tektro Auriga Twin Levers with Parking Brake Switch on Left

Grips:

Flat Rubber, Locking

Saddle:

DDK Active

Seat Post:

Aluminum Alloy, 35 mm to 27.2 mm Shim Adapter

Seat Post Length:

350 mm

Seat Post Diameter:

27.2 mm

Rims:

Double Wall Alloy, Stainless Reinforcement Eyelets and Nipples, 36 Hole

Spokes:

Stainless Steel, 14 Gauge, Black

Tire Brand:

Schwalbe Marathon Plus, 20" x 1.75" Front and 26" x 1.75" Rear

Wheel Sizes:

20 in (50.8cm)26 in (66.04cm)

Tire Details:

50 to 70 PSI, Performance Line SmartGuard, Reflective Sidewall Stripe

Tube Details:

Dunlop Valve (Presta Adapter)

Accessories:

ABS Cargo Box (Outer Dimensions 90 x 60 x 60 cm), Transparent Front Door with Child-Safe Lock, Integrated Isofix Interface Mount for Infant Car Seats, Locking Glove Box with Integrated Cup Holder, Alu-Core Fenders, Heavy Duty Two-Leg Alloy Parking Stand, Optional Supernova E3 E-Bike V6s Integrated Headlight (Set of Two) and Supernova 3 LED Integrated Rear Light, Optional Reelight SL220, Optional NuVinci Harmony Electronic Continuously Variable Transmission, Optional Hood with Skyview (Sunbrella® Plus Fabric), Optional Flat Cover with Roll Up, Child Pack (Padded Leather Seat with Two 3-Point Seat Belts), Optional Gates Carbon Belt Drive

Other:

Locking Removable Battery Pack, 1.7 lb 4 Amp Charger

Electronic Details

Motor Brand:

Bosch Performance Line

Motor Type:

Mid-Mounted Geared Motor
Learn more about Ebike motors

Motor Nominal Output:

350 watts

Motor Peak Output:

570 watts

Motor Torque:

63 Newton meters

Battery Brand:

Samsung

Battery Voltage:

36 volts

Battery Amp Hours:

11 ah

Battery Watt Hours:

396 wh

Battery Chemistry:

Lithium-ion

Charge Time:

3.5 hours

Estimated Min Range:

30 miles (48 km)

Estimated Max Range:

55 miles (89 km)

Display Type:

Intuvia, Removable, Adjustable Angle, Grayscale, Backlit LCD

Readouts:

Speed, Assist Level (Eco, Tour, Sport, Turbo), Battery Level (1-5), Odometer, Trip Distance, Estimated Range, Clock, Max Speed, Average Speed, Trip Time, Shift Assist Recommendation

Display Accessories:

Independent Button Pad with Tactile Feedback on Left, 6 Volt Micro USB Port on Display

Drive Mode:

Advanced Pedal Assist (Measures Wheel Speed, Pedal Cadence and Pedal Torque, Power Output Relative to Pedal Input: Eco 50%, Tour 120%, Sport 190%, Turbo 275%)

Top Speed:

20 mph (32 kph)(15 mph in Some Markets)


Written Review

The MK1-E is an electric version of the MK1 from Butchers and Bicycles, a company located in the meatpacking district of Copenhagen. Copenhagen is the capital city of Denmark, a bicycle friendly country in Europe where cycling accounts for roughly 20% of all commuter trips! I was impressed with the look of this thing from the very start and found that the ride is thrilling and dynamic given the tadpole trike three-wheel design. Butchers & Bicycles emphasizes their “Built to Tilt” handling which strives to maintain the fun of a two-wheel bicycle with the utility and strength of a trike. In my opinion, they did an excellent job engineering a leaning experience that is still strong capable as a hauler. The front wheels are 20″ which tend to be sturdier than more traditional 26″ wheels and allow the cargo box to be lower. This keeps the center of gravity down, high-stacked cargo out of your line of sight and makes it easier for children or dogs to jump in. I love that they offer a clear plastic door option with a child-resistant latch so kiddos can also enjoy the view as well and found that the side opening design didn’t rattle a whole lot. Same deal with the fenders and other accessories, it’s a quiet ebike even though it’s large and fully accessorized. The only real complaint I have about the MK1-E is that it costs a lot. You start at ~$6k USD and go up from there with integrated lighting options, a canvas cover for the front bucket, a clear rain cover that works in tandem with a child-pack (bench seat and two three-point safety belts), a rear facing infant seat and even different drivetrains. Stock, the bike offers a fairly traditional 11-speed cogset with SRAM derailleur but the demo bike I tested at Propel Bikes in New York was upgraded to a NuVinci N360 continuously variable transmission with Gates Carbon belt drive. This drivetrain is quiet, clean, more durable and permits shifting at standstill. That’s a great feature when you’re hauling a heavy load and dealing with hills. For those who want to completely do away with shifting, you can upgrade further to the NuVinci Harmony electronic auto-shifter which lets you choose a pedal cadence then handles all of the shifting automatically. This is a car-replacement electric bike and one that can be ridden faster thanks to the leaning design. Even at the 20 mph top speed, it feels comfortable thanks to a spring suspension system on both of the front swing arms and an upgraded Selle Royal saddle. You can take this further by adding your own suspension seat post as was done on the demo bike… just keep in mind that this option can raise the saddle’s minimum height. One of the nicer upgrades here that come standard are Schwalbe tires with a high level of puncture protection and reflective sidewalls. There are two color options and I’m a fan of the white which might show up better when riding in dark environments, complementing the standard reflectors, tires and optional Supernova lights that point where you steer.

Driving this electric cargo bike is one of my favorite motor systems, it’s a mid-motor that measures your wheel speed, pedal cadence and pedal pressure 1,000 times per second to be as responsive as possible. When you’re hauling gear, especially kids, you want a system that’s going to be reliable but also strong so you don’t get distracted or worn out. The Bosch Performance Line motor is an excellent choice for this and I had no problem carting my friend Chris around before we started filming the review. He later took me around on the bike and while I’m a bit lighter than his 200 lbs, the bike worked fine for both of us. I’d say, the most difficult part about the bike is not pedaling but getting used to riding a trike more like a traditional two-wheeled bicycle. It’s an experience that changes the way other trikes feel after you’ve tried it because you don’t have to slow down so much when turning or turn as hard. I’d say it’s safer because you don’t end up on two wheels when riding at higher speeds on unaven terrain while steering. Anyway, the motor is balance out by three 160 mm hydraulic disc brakes. The two front brakes are powered by a single lever (on the left) with a splitter and the rear by the second lever (on the right). The worked very well for me even with the extra weight of a grown man in the front. When it’s time to stop, the left brake lever has a little switch built in that locks front brakes and keeps the bike from rolling away. To fully stabilize the platform however, it’s best to deploy the kickstand system which has a leverage bar you step on and lifts the front of the bike up onto two metal posts with rubber caps. This completely eliminates the side to side tilting of the bike and allows for steady loading. When it’s time to go, just push the bike forward and the stand stows automatically. The cargo bay drops back onto the wheels and the suspension system cushions the load. Brilliant.

Powering the bike is a standard Bosch Powerpack 400, at least on the bike I tested. The interface for the battery is forward compatible to the newer 500 watt hour pack if you want increased range, but it will cost more. The way it’s setup, with a 115+ lb bike frame, the rider and cargo, I’m guessing the max range with minimal assist would be 50+ miles and if you use the full power of the motor and are climbing a lot you might get 30+ miles per charge. Bosch batteries are compact and have a nice plastic loop on the top making them easier to lift and carry around…. which is important in this case because it’s not exactly easy to charge on the bike. You have to reach up from the bottom and peer into a dark space while trying to plug the charging cable in. Of all the Bosch powered electric bikes I have tested and reviewed to date, the battery is most hidden and secured here but also the most difficult and time consuming to charge on-bike and and remove, there are just more steps and fiddling involved. I appreciat that the Powerpack battery case has an integrated LED readout to communicate charge level even when it’s not mounted to the bike. For someone who doesn’t ride often but wants to maintain their pack (by not letting it completely discharge) this is a handy feature.

Operating the Butchers & Bicycles MK1-E is fairly straight forward once the battery is charged and mounted. Just press the power button on the Intuvia display panel and watch it flicker to life. It starts up quickly and is large enough to read without bending over. You get a little battery infographic with five ticks, a speed readout and an assist level bar on the right. You can arrow up or down using the remote button pad positioned near the left grip to add or reduce power and there’s a little “i” button in between that circulates through trip stats like max speed, odometer and range. Range is very cool because it estimates how far you can go with the remaining battery charge based on how you’ve been riding over the past five miles and the assist level currently chosen. This is way more useful than the basic battery readout (which I wish was a percentage or had more ticks). The “i” button is duplicated on the right portion of the display just above the light button which activates the optional Supernova lights. It’s neat to be able to operate everything from one central location without having to reach too far or flick multiple switches AND I love that the display panel has a built-in Micro-USB port for maintaining the charge in your phone, music player or additional lights. Basically, any portable electronic device you want to add to the bike that can be connected through a Micro-USB cable (which you have to buy separately) you can get a 5 Volt charge for here. I’ve seen some ebikes with holiday lights strung across the frame and as Chris said, you could mount a sign for your business in the mid section of the frame or on the side of the front bucket and maybe illuminate it this way. My final props to this display are that it can swivel forward and back to reduce glare and that it’s removable! Being able to stop tampering and care for the display is really nice. For those who want to leave it on at all times, there is an included set screw that goes into the base of the mount also.

This review has been overwhelmingly positive because I can tell that the MK1 and MK1-E were designed well, use quality parts and offer a unique experience that other front-load cargo trikes just don’t. It does take some getting used to but it’s well worth the time and patience of practice… If you’re already used to two-wheel bicycles then it will feel natural. Many of my other trike reviews talk about stability and accessibility for people with limited balance and that is not what this trike excels at. It’s slightly more stable than a bicycle but less familiar and thus, on par in my opinion. I love the way it loads, am a huge fan of the accessories and appreciate the color options. The telescoping stem and standard adjustable seat post allow it to fit a wide range of riders, tall and short alike, and that’s great because you might need to share it in order to justify the high price tag. Yes, the Bosch drive system will last you and yes the frame is going to be solid. Perhaps you need to replace the battery someday and yes I’m confident that they will still be available. This is an ebike that will last and perform in ways that make it a valid car replacement. The Butchers and Bicycles website has a list of dealers in a number of countries and while only a handful are in the US so far, it’s a great bike to see in person if you get the chance.

Pros:

  • Clean, quiet Alu-Core fenders on all wheels, they’re long enough to keep your feet and pants dry up front and will keep your back clean in the rear… there’s still space and threaded eyelets to mount a traditional rear cargo rack if you wish
  • Optional NuVinci continuously variable transmission can be shifted at standstill, this is great if you’ve got a lot of weight and have to make a sudden stop or are starting a climb from rest, there’s also an optional Harmony drive system from NuVinci that auto-shifts and is pretty cool, both use a clean quiet belt drive
  • Hydraulic disc brakes on all three wheels wheels for powerful stops without the need for a lot of hand strength, the brake levers are adjustable reach so you can use them easily with gloves or if you have smaller hands
  • Plenty of traditional plastic reflectors, painted tires with reflective sidewall stripes and option for two integrated Supernova headlights that point where you steer as well as a rear LED light… it’s safe and utilitarian in darker ride conditions, I might choose the white frame color to increase the visual footprint of the bike vs. black shown in the review
  • The front portion of the bike uses springs to cushion the cargo box and Propel Bikes had added a 27.2 mm seat post suspension element so both passenger and driver would get some comfort on bumpy terrain, if you add a seat post suspension like this it will raise the minimum saddle height so keep that in mind
  • Powerful and responsive mid-drive from Bosch, it offers ~63 Newton meters of peak torque and is an excellent climber, the motor is mounted centrally on the frame to keep it balanced and stays clear of shifting mechanisms (even has shift sensing built in to reduce wear if you opt for the standard chain + derailleur SRAM GX drivetrain
  • There’s a built-in parking switch so you can keep the bike from rolling away but you won’t need it if you use the oversized kickstand, this thing has two bars that swing down and lift the front wheels off the ground! it’s easy to use even when the bike is loaded thanks to a leveraged foot press mechanism
  • Useful rain fly will keep your cargo dry… one of the kids at the shop jumped in and covered himself up with it like a fort! he was peering through the front plastic window just for fun (see in the pictures posted above)
  • You can do many different things with the cargo box including basic storage for groceries or gear, use the seat and seatbelts for kids or mount an infant seat using the special Isofix bracket
  • As the driver, you’ve got some neat options for storage that’s easy to reach, there’s a cup holder and bungee strap that works almost like a glovebox at the edge of the cargo bin close to the handle bars
  • Amazingly, not only do they have a cup holder in the cargo box area up front but there are also bottle cage bosses added to the base of the top tube! And the top tube is low enough that standover height isn’t so difficult for short riders
  • I LOVE the way they situated the battery pack… it’s almost completely hidden and very well protected just below the cup holder/cargo which is locking, the battery is still easy to get out and has a loop on top for easy grabbing (batteries are sensitive so you wouldn’t want to drop it)
  • You can charge the battery on or off the bike which is great considering how large the bike is… you might want to leave that part in the garage or outside, note that the recently launched Bosch Powerpack 500 battery is compatible with the same interface used here, the Butchers & Bicycles MK1-E that I tested used the older smaller 400 watt hour pack but it still offers good range
  • Notice how the front wheels are smaller than the rear? the smaller diameter can support more weight and lowers the front section of the bike making the cargo box easier to load or step into, the larger rear wheel is going to be more comfortable since it spans cracks and bumps better, it also has more air which can compress and cushion the ride, all rims have reinforcement eyeletts to improve strength where the spoke enters the rim
  • Both the seat post and stem height are adjustable so you can adapt the bike to taller and shorter riders very quickly and easily… could be perfect for parents who have different leg lengths
  • In addition to turning, the bike sort of leans side to side so it rides a lot more naturally and can corner without tipping the way that many other three-wheeled bicycles do
  • The way the front is designed, you can open a door so dogs can hop in or you can lift heavy items in without raising them all the way up and over the edges of the cargo box area, the optional clear door has a child-proof connection that’s designed to not open if your kids are poking at it from the inside ;)
  • The cargo box is made from ABS plastic, has grip tape on it to reduce slips and also drain holes in case of spills or rain entering… makes it easier to clean out too
  • Rather than having sharp threaded axles exposed at the front (the widest part of the bike) they have little caps that help you avoid scrapes
  • The tires used on this bike not only have reflective sidewall paint but they are also the Plus models from Schwalbe that offer the most puncture protection, changing flats on something this large and heavy would be a bummer so this is a smart upgrade in my opinion
  • I think there are five threaded bosses between the top tube and downtube (as well as two on the base of the downtube) where you could mount accessories or as Chris suggested, add a sign on the bike if you’re using it as a delivery platform for food or cargo… pretty neat
  • The Bosch Intuvia display panel is removable so you can keep it out of rough weather and away from possible scratches or theft (or tinkering if your kids are messing with it) and it even has a Micro USB port on the right side to charge your portable electronics, like a phone for GPS

Cons:

  • At over $6k and weighing in at over 110 lbs, this is an expensive and heavy electric bike… it may be difficult to bring home from the shop and isn’t sold in a lot of places in the US yet
  • I love all of the options here including a clear cover, the child seats, NuVinci drivetrains with Gates Carbon belt drives etc. but it really starts to add up… I know, repeat of the first con, it’s just a very expensive product to really do it right, even the lights cost extra :/
  • I feel like one thing that’s missing on this bike is a bell… I like the ones that are built into the brake levers (only Tektro offers this from what I’ve seen) but you could always add a flick bell like this, it just wouldn’t be as clean, sturdy or easy to reach
  • The bike is just narrow enough to fit through larger doors, I’ve listed all of the dimensions in the geometry section above in the stats but we were able to test this on one of the shop doors at Propel Bikes in Brooklyn and it worked, barely, if you have a more standard sized door it may not fit (most doors are 32″ wide)
  • There’s no chain cover or slap guard (at least on the belt drive system), if you get the chain option I’m wondering if it would bounce and potentially chip the paint? Chime in with a comment if there is a sticker slap guard or something different with the chain version :)
  • This is a more active trike requiring some balance and core strength, unlike many other three-wheeled electric bikes I’ve tested, this one lets you lean side to side and that makes for a more dynamic and fun ride but also less stable to start and possibly too much to handle when the front bucket is full of heavy stuff
  • While it’s possible to charge the battery when mounted to the bike frame, it’s a lot easier to simply remove it… and this is okay given the light weight of the Bosch Powerpack and its integrated loop handle, just don’t drop it because batteries are sensitive and expensive, ultimately this adds to the time and effort required for charging

Resources:

Comments (33) YouTube Comments

David
7 years ago

Sometimes I wonder if innovation has always a shroud! When you want more hp find a street race/mechanic ! When you want a ebike you have to get a new frame! Why?

  Reply
Court Rye
7 years ago

Hi David, that’s a great question… there are kits you can buy to convert regular bikes to electric but many of the best systems now require purpose-built frames (notice how the mid-motor attaches to this frame). Perhaps there is something to be said about economies of scale too, these days even with cars, many products can only be serviced with computer support at dealers. As ebikes become more advanced with multi-sensors and sealed motor/controller designs I think it’s difficult to modify them and thus, very few mechanics exist. In the US, these electric bike products are also pretty rare (though it’s growing) so even finding them in person to test ride and buy can take a bit of doing… let alone customizing them. I hope these thoughts shed some light onto the situation, I welcome feedback and appreciate your comment :)

  Reply
CF
7 years ago

I have this bicycle/trike as a second car for the household. It has grocery duties. An advantage of the tilt, is experienced when riding on roads with a huge camber angle. On a standard 2-wheeler, this is not noticed as much. But on a standard trike, the rider and cargo contents may be slanted towards the edge of the road. On the MK1-E, the rider can compensate somewhat, still be upright, and keep the cargo horizontal.

Other various advantages are that I am less wary about riding in a door zone even if I avoid it out of habit. The chances of coming off the bicycle in the rain is lower—which would be good if I were to carry a human in front. It is still possible to tip the bicycle.

It is a fairly long bicycle, so is not compatible with some bicycle “infrastructure” e.g. islands when crossing busy roads. It sometimes cannot maneuver through sharp turnings e.g. at bicycle crossings.

I have a frame-mounted rear wheel lock, which should be a standard purchase for this particular machine. This lets me park on the pavement, sometimes not close to a bicycle rack. I doubt I could reliably get close to a rack to use a u-lock; whilst not blocking other bicycles.

I had the same cover you had in the video. In practice, while it was on, I didn’t use the bungee cords and the cup holders much as they were inaccessible.

Overall, I am very happy with this machine. Mid-drive in particular puts my mind at easy. The other bicycle I considered was the Riese Muller Load.

  Reply
Court Rye
7 years ago

Great feedback! You mentioned a few clever upgrades like the frame lock and I could tell that you’ve lived with this thing and truly seen how the frame tilt can come in handy. Thanks for adding a lot of valuable insights that I hadn’t even thought of CF! Hope the bike continues to serve you well, swing by anytime to share more :)

  Reply
CF
7 years ago

Hi. I’ve watched a couple more of your reviews on electric cargo bicycles. They are so good. Here are a couple more points about the MK1E. I live in a place with marginal bicycle infrastructure. We’re in a peripheral city, so there’s only that much money and vision for that.

  1. Curbs/kerbs. At the local markets, there’s a spot where I can put the trike out of the way. But I have to mount a curb to get there. No ramp. On a standard bicycle, this is no problem: just ride or walk the bicycle, roll it up the curb and that’s that. On this trike, I get to the curb, turn the trike around (see next point), and then drag it backwards by the seatpost to mount the curb. Then park the trike. I can usually come down off the curb going forward, but have done it going backwards as well, when carrying eggs, or on a fully loaded trike.

    This also means that on a standard bicycle I can cross a median in the middle of a road fairly easily (if I can stand on the median with the bicycle). With the trike, it’s not an option (too heavy, too big); I have to find a different route.

  2. Changing direction. Sometimes when the trike is stopped, I just want it to point in a different direction. e.g. when I’m done shopping, or when I want to reverse the trike into a parking spot/garage. Again, on a standard bicycle, just lift and turn. Or do a 3-point turn if it’s fully loaded. On this trike, I lift the seat so that the rear wheel is off the ground. And then walk in a circle until the front is pointing where I want it to go. To be able to do this on a fully loaded cargo bicycle/tricycle, I think is pretty neat.

    If there’s something really top heavy (human, potted plant etc) right in front of the cargo area ahead of the front wheels, then be cautious, or avoid. Because the trike could just tip forward.

  3. Bottle holder. There are bosses for bottle holders which I haven’t used yet. But there’s also a bottle holder in front. Since I posted my last comment, I’ve started to use it regularly. I carry a Logitech UE Boom speaker, and play music (not spoken word e.g podcasts because I don’t have it that loud) from it (bluetooth from phone). I find it helps to listen to something aside from car noise, or the Bosch motor whine. I find it less hassle to get started/stopped, and safer than using wireless headphones.
  4. Service. I have a good local bicycle shop where I bought the trike from, that did my almost-one year service with. I think I really need this support. During this time I haven’t tried to remove the wheels yet e.g. to repair a flat. It’d be complicated by the belt drive in the rear, and the front arrangement. So I better make time to learn.
  5. The front ride is fairly bumpy when empty. I wouldn’t e.g. put a notebook computer on the cargo floor. I usually put eggs in a bag on the front seat and tether them to the steering riser to prevent them falling off. I’d carry a notebook computer in a backpack, or in a pannier on a rear rack.
  6. The front door is a weak spot if boxes lean on it. The latch is not fully secure (at all). And the raised seat area means that boxes will tend to tilt towards the door. If I carry a big box, I lean it as flat as possible so that it engages both the front corners, and doesn’t contact the door. e.g. when I carry a Brompton bicycle box, it ends up diagonally in the cargo area. I think in a different cargo bicycle, I’d be able to carry much more big boxy stuff (as opposed to groceries), just because the seat part is not necessarily in the way.
  7. The battery is nestled between 2 metal partitions. The best way I’ve found for me to charge the battery is to be flat on the ground (like doing a push up or plank) on the right side of the trike, and try to insert the charging cable into the slot. Opening the lid, and removing the battery routinely is just way too much work for me.

This was still the right purchase for me. It’s expensive, but as long as it helps me not buy a 2nd car for as long as possible, it’s worth it.

Joakim
7 years ago

With regards to the cons: The Mk1-E with SRAM GX 1×11 drivetrain that I got delivered directly from B & B a couple of weeks ago has a bell mounted and a BBB neopren protector on the chainstay. Don’t really see a need for a chainstay protector if you’ve got beltdrive.

Other than that, a lovely bike to ride. Just not as fast as a Bullitt. ;)

  Reply
Court Rye
7 years ago

Thanks for sharing this Joakim! Glad you’re enjoying the bike and yes, no need for a slap guard if there aren’t multiple cogs and belt vs. chain ;)

  Reply
Ned
7 years ago

There actually is a need for some sort of chain guard with the belt. In fact, it’s even more necessary. If you are riding at a good cadence and your pant goes into the belt, it will flip the belt off the sprocket, and then you need to loosen the entire rear end (6 bolts, I believe) in order to put it back on. Ask me how I know. I carry a full set of tools with me just in case. If I had the chain, it’s easy to just put it back on.

Genevieve
7 years ago

I gave this a test ride yesterday finally after having my eye on it for a couple of months. First trip out was by myself to get the hang of how it rides. I found it a bit unnerving at first but got used to it fairly quickly. Starting from a stop, uphill, while needing to make a right turn into a bike lane was quite a challenge but something I suspect would get easier as I became more familiar with it. As a lightweight rider (120lbs) I found that I had to lean fairly forcefully at times, which was weird and sometimes frustrating. I suspect it would be less of an issue for riders larger than myself and become less noticeable over time.

The next time out I had both kids (18 months and almost 4 years) in the box. There are some mild annoyances in this area. First, the buckles (at least on the one I rode) are “puzzle” buckles, meaning that you have to attach both pieces to each other, then insert them into the buckle. With wiggly kids this style of buckle is annoying and there’s a reason that very few car seats use it anymore. Furthermore, as far as I could determine, the length adjustment for the straps is not easy to access. Not a big issue if you always have the same kids riding, but annoying when you take a friend’s kid somewhere or are trying to test ride a bike. Finally, the bucket is so deep that my son’s head was right at the level of the edge of the bucket. This meant his helmet was banging against the edge of the bucket on every bump and he couldn’t see much. Overall though, the bucket left a lot of space for the kids and extra cargo if I’d wanted to put it in there, there was a lot of room over their heads with the rain cover on, and they did not complain about bumps during the ride even though I felt like they were getting bumped around kind of a lot. Of all the bikes at the store this is my 18 month old’s favorite because the door means it is the only one he can get into by himself. I loved being able to open up the back of the rain cover to make talking to them easier.

For hill climbing, especially loaded, I was impressed for a trike but found it lacking compared to the Riese and Muller e-cargo options that we’ve also been considering that have the same Bosch motor.

  Reply
Court Rye
7 years ago

I thoroughly enjoyed your comment Genevieve, thanks for sharing insights on how the child seat buckles might be improved. This is something I had not even considered, also the depth of the bucket. Thank you!

  Reply
Ned
7 years ago

I have this bike, and I love it. It is my main source of transportation, and I put about 2,000 miles a year on it. I use it to take my 5 year old to school and to bike to work. I load it up with tons of groceries. I take my dogs in it. I even have a flat bed trailer I use for going to the lumber yard. I have a rear rack on it and have Ortlieb panniers and can hold a ton of stuff. Overall, I love the bike. But there are a few issues that you may not notice on a short review ride.

  1. There really isn’t suspension on this bike. Your (terrific) review makes it sound like it does. The springs that you see are only to assist the bike righting itself through the corners. We have some pretty vicious potholes around our area and my son complains about the ride. It does actually ride much better with a good load in it.
  2. You have 3 wheels to worry about. On a 2 wheeler, if you see a pothole you steer around it. Most of the time if your front wheeler misses it your rear wheel will miss it as well. Not so with a trike. You now have to worry about both of the front 2 wheels. And if you forget about the back wheel and hit a pothole it will send a spike right up your spine. You have to pay attention. On a positive note, the 3 wheels make it more stable in the snow.
  3. The NuVinci system, while good, isn’t perfect. Yes, you can shift at a stop which is great. But if you are pedaling with the assist on you will have difficulty shifting without a brief stop of the pedals. It took me a while to figure this out. I think the Bosch motor puts a lot of torque on the hub, and if you don’t pause your cadence, you will have a tough time shifting. It will require quite a lot of hand strength. This is a bit of annoyance as they sell it as a fluid shifting experience, but you really have to give a pause. I developed “trigger thumb” because of it. Once I figured out the pause I was able to heal the tendon in my hand. I would like to upgrade to the In-Sync system, but it requires me to send the motor back to Bosch, or sell this bike and buy a new one.
  4. The shifting cables (there are 2, it’s a push/pull system) on mine got water in them. This might not be an issue for most people, but if it is below freezing the shifter will freeze up. I keep the bike in a garage so it is around 50 degrees when we get in. Depending on the temperature outside it may freeze in a half mile. If it’s really cold it might be a few hundred feet. You have to find a happy middle gear before the freeze up. It is a real annoyance. I just replaced the cables and hope this will fix it. Again, for most people this will probably not be an issue.
  5. It is wide. Not horribly so, but with a 2 wheel cargo bike you can squeeze between a stopped car and the curb by having your tires a few inches from the curb with the box above the curb. You can’t do that with the trike. You do have good visibility of both wheels, so you know what you can get through, but there’s no way you can use extra finesse to slip through. Maybe this isn’t that important for everyone, but we live in a seacoast town that gets very backed up in the summer and it’s not much fun to be stuck in a traffic jam when you are used to being able to skirt around stopped traffic.
  6. There really should be some sort of chain guard on this. I think the designers liked the clean look of not having one, but if you get your pants caught in it, it will pop the belt off, and you have to undo the whole rear wheel assembly in order to get it back on (6 bolts). If you try to force the belt back on you will ruin it as it is carbon fiber (at least that’s what the manufacturer says).
  7. For a bike this expensive I really wish they had included a good tool set. After twice jumping the belt with my pants I put together a nice set and I keep it in the glove box.

Again, I love the bike, and your review points out a lot of the great features. But I am actually considering moving to the Riese and Muller Load to get the suspension and the upgraded Hi-Sync system and motor. I think it would fix a lot of the above issues. The only problem I see is the loss of stability in the snow. Thanks for your great review. When are you going to review the Load?

  Reply
Court Rye
7 years ago

Hi Ned, you raised some excellent points about a three-wheeled experience that I hadn’t considered. It would be frustrating to hit potholes and be limited on navigating through traffic. I really appreciate you taking the time to share and agree that maybe a toolkit is a good thing for everyone. Your thoughts were very fair and I hope the bike either works great ongoing now that you’ve learned about the limitations or you find something that’s a better fit. I’ll be reviewing the Load soon… just had a business trip that has slowed me down for the past week. Sorry!

  Reply
Matthew Agrella-Sevila
7 years ago

Hey Ned, Are you still considering selling your MK1-E? I’m very interested!
-Matthew

  Reply
Ned Savoie
7 years ago

Hi Matthew, I am considering it. I’m in Portsmouth, NH. Where are you? Now that my son is riding his own bike I don’t need the amount of room up front. The only problem is getting a chance to demo the R+M Load or Packster involves a 5 hour trip to NYC, and then if I order a bike it takes 3 months to arrive. I just need to figure out the logistics. Let me know your thoughts.

Matthew Agrella-Sevila
6 years ago

Hey Ned,
We are in Brevard, NC. But, we lived in Vershire, VT for four years and love it up your way. Can I email you directely?
-Matthew

Ned Savoie
6 years ago

Hi Matthew, send me over an email to [email protected]. If not, just search on my name and you should be able to find me. Or put gmail.com on the end of nedsavoie and you will probably find me. Cheers!

Tokyoskies
7 years ago

I also have this trike (Butchers & Bicycles??? Should be Butchers & Tricycles). I am riding it for about 6 weeks now and have around 400 miles on the clock. I live in Munich, Germany, which is a great city for cyclists. Almost all streets have bike lanes on each side and a lot of the side streets are designated bike streets, where bikes have priority over cars. One-way streets are accessible for bikes both ways. Overall the ideal ground to test bikes and trikes. This being said, you will see a huge amount of cargo and family bikes of all makes and shapes and price levels.

The most popular is the Nihola, which is a really stylish tadpole trike. There are 100s of them here. Also Bakfiets, Bullits, Riese & Müller and so on. One of my mates actually imports cargo and family bikes and his shop is thriving, with sales increasing every year.

I am lucky to be one of only 10 MK1-E (and non E) owners here in Munich and as a bike enthusiast and frame designer (as a hobby), I can tell some pros and cons. I definitely share CF’s opinion and experiences. However, I do not mind taking the battery out for charging. ;) What I can add is, I find the Nuvinci in its current form insufficient. H-Sync is a must, or as a bare minimum Harmony. Proper shifting is essential, especially with load.

The Bosch Performance Line is a tad too weak for this huge device. I guess this is why the new 2017 models have the Performance CX with 70nm instead. Also, I could see the 2017 models have a lot of kinks worked out and are improved overall.

I have ridden a lot of bikes and also had my share of cargo trikes. I must say, nothing was as exciting as the MK1-E. It gets me every single time and I am riding it daily. Now, this being said “It gets me every single time” is not always a good thing. The MK1-E behaves erratic and unpredictable at times, which causes me to ride way more focused on my actions and surroundings. I have to keep watching traffic, road conditions, turns and obstacles way more than I would on a normal bike. For example, the tilting mechanism is awesome, but it needs a few degree more at certain turns to be fully useful. I sometime have to slow down dramatically to be able to steer more than i can lean.

Another issue, the tilting is the highlight of the trike, but its also its biggest gripe. Both wheels are tilting on the same central axle, like a see-saw. This means that anything on the road effects both wheels simultaneously. If I hit a manhole cover, pot hole (gosh) or curb on one side, it automatically affects the other. This is most noticeable when turning over tram lines or uneven pavement/asphalt. The trike will immediately understeer on the front and drift a few inch away. Individual suspension would benefit this trike more than anything.

The lack of such a tilting suspension system also causes the ride quality to be extremely bad on any kind of uneven and patchy road, let alone going up and down curbs (even small ones). As CF mentioned, I was extremely worried to pack my laptop next to some HDDs. Luckily, everything survived. I am more worried about the MK1-E enduring daily torture of Munich roads and bike paths. There are frequent patch works and wavy asphalt. (I did stop a few times, after a sudden hard bang, but so far it seems ok)

One thing I can recommend is to get yourselves some Schwalbe DocBlue or Stans tube sealant. You really do not want a puncture on a trike like this. Especially on the rear.

Overall, the build quality is really good, but execution is poor. I immediately notices some paint chipping of where someone was yanking a bolt too tight. (no, it wasn’t me)

After 20 miles, I noticed that the main nut of the right front wheel was loose. And I mean really lose. So much that the brake was dragging. (On this note, I would recommend to check the steering alignment on both sides. When looking at a front wheel from the top, you will notice a line in the metal plate. This is used to align the wheel with the top plate of the tilting mechanism, thus having a wheel exactly straight. Align the line with the edge of the top plate and then check whether the wheel on the other side is also showing a straight line, as well as the handle bars being straight. In my case, the right wheel was not aligned and tilted outwards by like 5 degrees. I then adjusted this myself)

After 400 miles, while cleaning the trike, I noticed that BOTH!!! lock nuts on the rear wheel where loose. Again, completely loose. This prompted me to check all screws, nuts and bolts on the trike and behold, a good half of them were loose and I was able to turn them by hand.

I do some an issue with the rear wheel not sitting centered. Looking at the ABUS frame lock I can see that the tire distance to the lock is about 5mm, while on the right its at least 11mm. Looking at the tire running along the mud guard, it is not sitting straight, but seems bent in some why. Could be that the wheel is not dished correctly. Also, the 2 front mud guards are mounted with 1 screw only and it seems the top screw is missing on both sides.

Really bad are the steering limiters. These are rubber stoppers mounted on small steel pikes, which are part of the tilting/steering construction. They simply have the purpose to limit steering angles. Due to the metal pike being some weird sharp trapezoid shape, the left rubber had sheared through and I had to improvise to repair this. If those pike where properly round this would not have happened.

I also worry about the rubber stoppers mounted on the kick stand. They will wear off and probably sooner than I want. Butchers & Bicycles told me that I can order new ones through my dealer, as they are order made and surely, I was not able to find this size anywhere.

For the price, some of the components used are really the bare minimum. The bell was a joke and I replaced it with a Spurcycle. (I wanna install a fog horn) The Bosch Intuvia was not really good, so I replaced it with a Nyon. I will also replace the Nuvinci with either HHi8 or H-Sync. The lights in the front are ok, but the rear is a bit small and because its mounted on the left, there is somewhat of a dead zone, when looking from the rear-right. The rims on all 3 wheels are not really good. The joints are the worst I have ever seen on any rims. I am now trying to find alternatives for these. Perhaps something carbon.

After so much ranting, I wanna stress that I do love this trike. I mean from all the tadpoles I have ever ridden, this is the best. I do have the 2016 model and wish I would have waited for the 2017, but too late now. I am still a happy camper and will work on getting the current kinks worked out. My local bike shop (Velocompany.de) is awesome and they do know their stuff.

  Reply
Court Rye
7 years ago

Wow, thanks for the detailed writeup Tokyoskies, I enjoyed hearing about your upgrades like the Nyon and thoughts on 2016 vs. 2017. In the US, we have a Bosch CX motor with 75 Nm and I agree that for such a heavy and large ebike this makes sense. I hope it continues working for you, or at least making you happy in the mean time as you repair and customize it. Maybe Loctite glue will help the nuts to stay more secure? It sounds like you use the bike a lot, feel free to share any more thoughts down the line, I think it really helps people who are considering the same product or looking for help on a fix.

  Reply
Tokyoskies
7 years ago

No worries, I love to share. Cannot believe I typed all this on my phone.

Loctite 243 is the one I would recommend. The bikeshop guys were pretty shocked about the lose nuts. Then again, **** happens.

I will receive my new CX Motor in August for about 600 bucks. As you said, it’s a must have upgrade and since it’s the 2017 CX, I will be able to add a 2nd battery. This will give me some serious range, even in turbo.

The most difficult to change will be the ride comfort. I find it incredibly difficult to strike a good balance between tire pressure, rolling resistance and ride comfort. I am running about 3bar (40-45psi), which is really good for rolling resistance, but way too hard from a comfort perspective. Every bump hits hard. If I run 25-30psi, I find the trike too soft and lacking agility. (I also think a lower PSI increases the risk of pinch puncture)

I was talking to a guy on a single speed, yesterday. He asked me about the B&B and wanted to know more about it. He was probably the 4th or 5th person to think that the MK1 has independent suspension on the front wheels. HE was very surprised that this isnt the case. If I wanna mod the front axle to add independent suspension, I would need to do some serious engineering. (more than I can afford time wise at the moment)

So, the next project for me is to add some Loopwheels to the front. I think this will be a good match for the MK1 and add some serious comfort for the kids (and my cargo). Problem is, those guys stopped making 20″ wheels and now focus on 26″ wheel chairs only.

Alternatively I could imagine to change the wheels for some 20″ Bygen Carbon wheels. What do you think?

friend
7 years ago

Would be nice to have a Tesla Powerwall where the locking storage compartment is, run wires to a trailer hitch and pull a camper trailer, power it up when you can by ‘shore power’, have some solar on the roof of the camper trailer. With a chemical toilet and some air conditioning, could be livable long term.

  Reply
Court Rye
7 years ago

Yeah, that would be so cool… an electric bike RV or sorts! I saw a few custom bicycle RV concepts a while back like this. It really got me thinking about how people live and what is possible :)

  Reply
Fredrik
6 years ago

Thanks for a very helpful review and all the valuable comments! I have not seen a spec for “maximum weight inside carrier” and “maximum height of a passenger without hitting the inside of the hood”. Do you have this information?

Today, we ride a TrioBike Mono which in my opinion is the best looking cargo bike around. More importantly, it is light weight and the company underlines safety as one of the key traits. We’ve ridden it for 5 years and it holds up as brand new. Doing research again as I will either convert it by adding the BionX motor or simply buy a new electric cargo bike. I find the MK1-E very interesting. Have any of you contrasted the Trio Bike Mono-E or Boxter-E models to MK1-E? Findings?

Really interested in this as it would be a comparison between two really innovative makers.

  Reply
Avaril
6 years ago

Thanks so much for the review, it was comprehensive and very useful indeed.

I have a question regarding this carving (tilting mechanism) – Having tried the bike myself and also a Babboe Carve (same tilting system), I found it to be very unstable at low speeds. I was surprised at how unstable it felt, almost like it will topple over if you’re not fully balanced all the time. Did you experience this at all and if so did you simply get used to it after a while? Thanks, Avarils

  Reply
Court Rye
6 years ago

Hi Avaril, I did experience some instability at low speed and when getting on the bike, it seemed to tip side to side… I haven’t ridden the MK1-E for quite some time so I cannot be as detailed in describing how it felt, but I do remember having to balance a bit and wondering if the steering was loose or if that was just a side affect of the tilting steering design.

  Reply
CPM
5 years ago

Pennsylvania law defines pedalcycles as weighing less than 100lbs. With this weighing over 100lbs, do you know what is involved with legally operating it?

PA ebike law link here.

  Reply
Court
5 years ago

Very interesting… I’m not a legal advisor and haven’t visited Pennsylvania, most states talk about power and speed limits vs. weight. My own experience has been that if you’re riding carefully and are respectful with law enforcement, they are generally very accepting of ebikes. I have never once been pulled over or questioned. Butchers & Bicycles does sell a slightly smaller cargo ebike that might weigh less. I’m not sure anyone would actually pull you over and try to weigh your bike unless they were trying to charge you based on behavior. These things definitely look like bicycles, and if you are hauling kids or cargo, I suspect that most people would just smile at how unique it is vs. feeling a need to question or charge you. But again, I’m not a lawyer. You could always send a picture to your police department and ask. I carry around a special doctor’s note when I ride because I have a knee injury and ebikes reduce my pain. I’ve never had an opportunity to even show the note, nobody has ever asked or cared that I was on an ebike.

  Reply
Chris
5 years ago

Court, it has been a couple of years since you posted this review. Since Propel Bikes seems to be one of the few dealers in the U.S., any chance you could do another review on the newer version of this bike and also discuss the ordering process?

  Reply
Court
5 years ago

Hi Chris! Thanks for the request, I am in touch with Propel and it may be possible to work in another Butchers & Bicycles review. I’ll keep this in mind when he and I connect again soon :)

  Reply
Aaron C
1 year ago

I think it would be great to see a review of the latest version of this bike, it’s so unique and I’ve been considering getting one for myself but there isn’t a lot of information on the internet about it.

Post a Comment

Cancel reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.