Recent content by Calicoskies

  1. C

    Volt Bravo and Yukon Body Position Help

    Yea guess that may of helped, I am 6 even, my son also has a Yukon and is 6'3". My inseam is 32 he is 34. Now we need some Bravo folks to speak up. With only a inch difference from Bravo to Yukon I can not see it being a problem. The Yukon is great for snow or sand and attracting attention...
  2. C

    Volt Bravo and Yukon Body Position Help

    The overall dimensions are within one inch, I think you would be fine with Bravo. I guess the inseam is what matters. I have the Yukon and added a extension to make even more upright, barely bending now. Maybe others that have both the Yukon and the Bravo will have some insight.
  3. C

    How Do I Make The Yukon 2018 Voltbike faster?

    The hard code in controller is 15 max on all bikes, no difference on where they are shipping. The owner can adjust from whatever the low is (7 or 8 amps) up to 15. If you set the current (CUL) to 25 it is still only going to go as high as 15 because of the controller max that is set.
  4. C

    How Do I Make The Yukon 2018 Voltbike faster?

    CUL is what it shows in the advance password area on the display, just means Current Level. They just use the 48vdc battery as reference, so 48 x 10 amps = 500 watts and 48 x 15 amps = 750 watts. Numbers little higher because a 48 vdc 100% charged is around 54 vdc.
  5. C

    How Do I Make The Yukon 2018 Voltbike faster?

    You need to change the CUL which is current setting to 15 also, Canada it should be set to 10 amps for 500W. You can set these numbers higher but they are hard coded in the controller that as far as I know nobody has tried to cable in and change them with APT software. Will go to about 22 MPH...
  6. C

    Poles in Motor – 850C Display Upgrade – VoltBike Yukon

    Not sure if the below is correct or not, seems wrong to me because all Bafang systems do not use poles statement. Anyone with the DPC14 (same or similar as 850C) that want to chime in on this questions (thread). Still sounds like it just does not matter and does nothing but would be nice to...
  7. C

    Locking Up with a Front Basket

    Never tried it, would not leave my bike alone. I have brought inside stores but would never leave it outside, to big of a target. Pretty tall bike would think it would clear the rack.
  8. C

    Poles in Motor – 850C Display Upgrade – VoltBike Yukon

    Just found a third definition of Poles in motor. Now it should be 4, 6 or 10. Anyone want to take a guess (I am not sure so all answers will be correct at this point)? Poles in motor: 4 - magnetic poles inside the motor, divide this by gear-ratio in motor, which is 5, e.g. 20/5=4 poles
  9. C

    Poles in Motor – 850C Display Upgrade – VoltBike Yukon

    Everything has worked since day one including watts. Main reason for change was to see voltage on main screen but really like the look overall. Speed on top and the watts show on bottom. Would be nice to know what the Poles mean for sure how APT is using them with the Bafang motor. I still...
  10. C

    Poles in Motor – 850C Display Upgrade – VoltBike Yukon

    Wanted to mention one more thing. On a KT-LCD3 they have a P1 settings that may be somewhat related to "Poles in Motor". Think for the P1 you just take gear reduction which is 5 multiplied by magnets in motor which is 20 that gives you P1 setting of 100 (common on the hub motor). Maybe this...
  11. C

    Poles in Motor – 850C Display Upgrade – VoltBike Yukon

    Had a question about my upgraded 850C (DPC14) display on the VoltBike Yukon. I have last year model with HW version E2.1/ SW Version 1.0A-V2 the newest one pictured below with color settings menu has HW version E2.3/ SW Version 2.0A-V2. Looks like the only thing confirmed different is the Auto...
  12. C

    Single gear vs multiple gears

    I have the EBC, it has 1300 watts to get you started from a stop with ease. I do not miss the gears on that one. Also has a 56T front and I think 18T on back so no hamster wheel on this bike. My point is the gears are not really needed and with the 18 amp battery you have a lot of miles. My...
  13. C

    Yukon 750 limited controller

    Not sure which year he has but the 2018 model forward added a 25 amp controller but it is software locked to 15 max. Yes you can change the controller. Likely best way is a KT display with a new controller, maybe something like the Radrover upgrade but not sure if that kit works with Yukon.
  14. C

    Alternate Cassette for Yukon 750 (2019 Model)

    This came from Voltbike for another user trying on the FaceBook site. Most just change the front which would not help you for lower gearing. Does not sound like the greatest answer. "To remove freewheel where oversize power chord blocked the use of standard freewheel tool: Unfortunately this...
  15. C

    How Do I Make The Yukon 2018 Voltbike faster?

    It is on all. The 2019 models has not confirmed this yet but do not think controller was changed. Easy to try just go to 20 and check the P setting or watts to see how high it goes, over 1000 with full battery they changed the lock. I doubt it.