Recent content by John Fuller

  1. John Fuller

    Bosch Kiox Ebike Display Settings

    I just purchased an R&M Delite with the Kiox display. Is there any way to rearrange what shows on the screen, i.e., I'd like a screen that shows Cadence and distance covered. Additionally, is there a way to change the assist levels for Eco, Tour, Sport, Turbo? I'm finding the 55% in Eco mode...
  2. John Fuller

    What Real World Range Are You Seeing With Your Specialized Turbo?

    I have a 2014 Turbo. I have Eco mode set to 70% (I'm almost 74 years old.) and I consistently go 25 miles with 50% remaining at the end of the ride. I ride almost exclusively in Eco mode, and average about 16mph. Terrain is mostly flat with a few moderate hills. Battery was upgraded to the 504...
  3. John Fuller

    Turbo Owners -- What's your total mileage? [OFFICIAL MILEAGE THREAD]

    6,000 miles on 2015 Turbo in the past 18 months. Recently replaced the original battery with the 500+Wh battery. I’ve also replaced the brakes with Shimano, installed Ergo bar grips, replaced a failed joystick display and installed a Body Float seat post. The bike is a joy to ride.
  4. John Fuller

    Prior Gen (Hub Drive) Turbo Display Issues

    I had the same issue and opted to pay the $100. New unit works fine. I don’t know what the option will be if the new unit craps out. I have 6,500 miles on the bike, but see no reason to scrap my 2014 turbo and spend several thousand on a new bike. It seems like there ought to be a way to...
  5. John Fuller

    Turbo battery cover cap

    After losing mine a couple of times because I had it on the magnetic holder on the bike when I left for my ride, I bought a small magnet and superglued it to the top of the charger. Now, when I remove the cap from the bike I put it on the magnet attached to the charger. I thought about putting...
  6. John Fuller

    Turbo Owners -- What's your total mileage? [OFFICIAL MILEAGE THREAD]

    3,870 miles since last August with lots of days off and rides on other bikes. Love my Turbo I just mounted These same tires today, and found the rear wheel rubs agains the fastener that holds the rear fender to the frame just behind the seat post. Did you have to adjust this? And if you did...
  7. John Fuller

    BodyFloat / Specialized Turbo X - Seat Post Drilling for rear light wire

    I tried to get Cirrus (now Kinekt) to drill the hole for me when I placed the order. They said everything in stock was already bonded and could not be drilled. They did,however, tell me any good machine shop could do it (3/16" hole). I punched a small guide point in the top of the post and...
  8. John Fuller

    Moving LED module from seat to fender bracket - Specialized Turbo

    I recently ordered a Body Float seat post for my Specialized Turbo. The vendor said they couldn't drill a hole in the top of the post to facilitate routing of the LED seat light module wiring. That got me thinking that I might remove the LED module and mount it to the bracket on the back...
  9. John Fuller

    Does any suspension fork work on the Turbo or Turbo S?

    John, did you ever install the Rockshox Paragon fork? Was it difficult or an afternoon project?
  10. John Fuller

    Adjusting Pistons for Brake Rub on Formula C1 (Turbo X)

    I tried adjusting that before my first post, but the rt. Brake level could not be made to budge. After allowing the bike to sit and cool off for about an hour, the real wheel would spin and I was able to ride the bike. The rear brake , however is unusable. I plant to take the bike to my local...
  11. John Fuller

    Adjusting Pistons for Brake Rub on Formula C1 (Turbo X)

    I just purchased a used Turbo X that had only been ridden 55 miles. Test rode it and all was fine. Rear brake level didn't have nearly the travel of the front, but still worked. Carried the bike home on my Thule rack and when I tried to ride it around the neighborhood,the rear brake level had...