harryS's latest activity

  • harryS
    harryS replied to the thread Trailer Hitch.
    That clears it up! I was looking at the picture of the mid drive bike. You have the hub motor version, What you're looking at is the...
    • trailer.jpg
  • harryS
    harryS replied to the thread Trailer Hitch.
    That clears it up! I was looking at the picture of the mid drive bike. You have the hub motor version, What you're looking at is the...
  • harryS
    harryS replied to the thread Trailer Hitch.
    Maybe you should show a picture of your issue. In looking at internet pix. I don't see anything near the left side axle bolt, except...
  • harryS
    harryS replied to the thread What to do with this old Schwinn.
    Here's a Schwinn SC2000 that someone threw out. I rescued it and made it electric. The motor is an ebikeling 500W geared rear hub. Back...
    • R8230012.jpg
    • final.JPG
  • harryS
    They had to put steel rods in his spine. That's sounds serious.
  • harryS
    harryS replied to the thread Trail-a-Bike and Similar Products.
    I have pulled the 20" hitchhiker on a number of bikes, but that's designed for children. I don't think that carrying an adult would...
    • hitchhiker.JPG
  • harryS
    Huffy is less expensive unless you need a Presta Valve. The tradeoff is their tube ends don't snap together. At least mine didn't...
  • harryS
    The clamping block that presses against the stem tab should have a tensioner for adjustment up/down. There has to be some adjustment or...
  • harryS
    I carry a tool kit specific to each bike when we're on trips far from home. Hub nut wrenches, tire irons, patch kit, pump, multi-tool...
  • harryS
    If I'm driving from CHicago to Tampa around New Years with bikes, and I have done that, I want the bikes inside my vehicle. They or at...
  • harryS
    harryS replied to the thread Is this tube defective?.
    I've had three flats awat from home in the last few weeks, so I've seen three inner tubes. One appeared symmetrical, but the other two...
  • harryS
    Unless one absolutely need the 48T, A horrendous waste of money, IMO. You can buy an 8-speed 11-42 that sells for less than $30. When it...
  • harryS
    Not shabby at all is your 14% difference. At that same average speed, 11-12 mph, this 195 lb rider burns 30-40% more AH than his 140...
  • harryS
    harryS replied to the thread 750W from Ali.
    Yep. I call them crankshaft or woodruff keys. My history with motors has been marred with the slots on the motor shafts failing to hold...
  • harryS
    harryS replied to the thread Hub and freewheel wobble.
    Let's see your video.