Recent content by Trini

  1. T

    Bafang bbs02 help

    Hello, New problem with my bbs02.. Motor runs by itself (Autopilot) I can pedal one time and then it accelerate by itself? And keep going to top speed. It came up with error 4 (throttle will not go to zero state) I have tried with new throttle and it's still the same. I have dismounted the...
  2. T

    Bafang bbs02 help

    Hi, It turns out the nylon gear bearing was mounted wrong. It was a factory fault! I'm now talking with greenbikekit about it, and they will talk with bafang about it. Hopefully they will send me a replacement. Thank you for all your good help :) Best regards,
  3. T

    Bafang bbs02 help

    Yes. I have removed all grease and still the same! I have just ordered a new pinion gear from greenbikekit. The one I have now is called z2 and have a o-ring on. My old one didn't. So I ordered the pinion called "2" Don't know the difference, but my model is from 2015 and the old pinion didn't...
  4. T

    Bafang bbs02 help

    The nylon gear is locking when I turn it around. So that is working. Is it perhaps a wrong pinion gear I'm using. There are a few different models.. Put it plugs in nicely. Is it the main crank? Because that worked perfectly before changing the roter and nylon gear, and I haven't touched it.
  5. T

    Bafang bbs02 help

    Still no luck. I have checked and done all above. When throttling the pinion gear and main big wheel just snail around! And I can stop it with two fingers while throttling. No pulling power... Rotor and nylon and pinion gear can only be mounted one way... So it should be straight forward and...
  6. T

    Bafang bbs02 help

    I used some brake cleaning spray which doesn't harm plastic, so I think I'm good. I only have the classic yellow barring grease. I can't use that on top of nylon gear?
  7. T

    Bafang bbs02 help

    I did put in some extra grease before mounting it... Maybe that's issue. I will now degrease it all with some spray.. Hope it works.
  8. T

    Bafang bbs02 help

    Sorry the I mean the G1 nylon gear
  9. T

    Bafang bbs02 help

    I have tried turning the nylon gear but it can only be installed one way or else the lock ring won't be able to put in place. I am using the z2 pinion gear with the G2 nylon gear (0ld one). Before putting on the cover for the free wheel I can see that everything is turning as it should, but...
  10. T

    Bafang bbs02 help

    Hi, Thank you for your reply. I have already opened it 3 times in case I've overlooked something.. And nothing. I followed various YouTube clips making sure. There is no error on screen, but I'm guessing it's a electrical fault.. I can use throttle even though I am pulling the brakes?? I...
  11. T

    Bafang bbs02 help

    Help.... I just finished replacing my new rotor and nylon gear and pinion gear in my bafang bbs02. Motor turns on fine, but only spins inside without pulling chain and turning the rear wheel??? Everything is plugged in correctly! Hope somebody know of this problem..