Search results

  1. lordnox09

    Reention newly upgrade 48V 25Ah&36V 30Ah (505L) interchangeable for eBikes Surface 604,NCM,Rize,Magnum,Aventon

    Yes she did get back and said there 52v 20Ah but I currently have 2 52v17.5ah that have only been charged a few dozen times just bought them last fall so the 25% isn't worth ATM but I know where I will get my new batteries I also had a NCM Moscow plus my girlfriend still has the NCM Prague...
  2. lordnox09

    Reention newly upgrade 48V 25Ah&36V 30Ah (505L) interchangeable for eBikes Surface 604,NCM,Rize,Magnum,Aventon

    i have the bafang ultra 1500W I was hoping it would be a bit higher than 20AH i have 2 17.5AH batteries but was looking for a decent upgrade on range and i found with the 48v battery the last 25% of the battery is too weak for the 1500w draw and would cut power
  3. lordnox09

    Early Stages But Kyle Chittock of Bolton Ebikes is Alright With Me

    I was on the edge of my seat reading your reply to eachother waiting for your bikes to come I was stuck between getting the blackbird and the biktrix juggernaut ultra FS but after finding the biktrix forum and realizing that there also Canadian was the deciding factor the USD conversion is...
  4. lordnox09

    my juggernaut ultra FS struggles (LBS CAUSED 99%)

    Thanks again Roshan sent one email in and my problems where solved wish my bike shop coulda done the same thing to prevent this whole mess in the first place. I have not been let down by the customer service from biktrix when I delt with them Can't say the same about my LBS though
  5. lordnox09

    Info on Stunner LT with torque sensor

    you will get a better average range on the hub drive meaning more often than not you will get the same say 40km per ride And range mostly depends on the gearing and effort you put in on mid drive for instance when I go ride with my buddy we rip around everywhere I can usually get 30-35km on a...
  6. lordnox09

    Juggernaut Hub Duo with Torque sensor or torque and cadence sensor

    Nah that's just how it works to make it feel like a proper bike just means it's measuring both pedal pressure and the speed at which your pedaling to work together instead of the motor cranking so fast you can never keep up
  7. lordnox09

    my juggernaut ultra FS struggles (LBS CAUSED 99%)

    thank you, gonna be a much better summer not worrying about that anymore now on to a second wheelset so i can stop chewing up my minions on the pavement
  8. lordnox09

    my juggernaut ultra FS struggles (LBS CAUSED 99%)

    I I did originally look for some hubs but wasn't having any luck finding a 197mm hub I have seen a couple now but just worried if the extra torque will chew them up I have the bafang ultra and the hope hub I saw think only had 4-8 pawls but I assume better material on it the stock biktrix one...
  9. lordnox09

    Reention Battery Ground Washer Needed.

    No yeah your good looks the same as the rest of them I have seen including my own and had many pouring rain rides
  10. lordnox09

    Reention Battery Ground Washer Needed.

    I've replaced 2 mounts and had 3 off and none of them had a thin washer like in the picture
  11. lordnox09

    Reention Battery Ground Washer Needed.

    Not that I have heard of anyway the battery has an internal BMS I assume the ground is done through that or one of the cables The mount just has a couple screws that go through the plastic no special grounding screws or anything Can you send a picture of where it came from
  12. lordnox09

    Reention Battery Ground Washer Needed.

    Is there still a nut on the outside of the battery port and same on the bike? If they are loose it will cause the battery to wiggle try to tighten those nuts I have had 3 retention batteries and none of them had a thin foil around the connector they all have nuts
  13. lordnox09

    my juggernaut ultra FS struggles (LBS CAUSED 99%)

    i have taken the cassette of and tried to tighten it again i even tried another cassette on it its been a month now since i got the new hub replaced and i watched and checked every video on the subject i can. I had my bike in the stand for 6 hours the other day trying anything i could find to...
  14. lordnox09

    my juggernaut ultra FS struggles (LBS CAUSED 99%)

    I did originally try that I even changed the pads and re bled the brakes
  15. lordnox09

    my juggernaut ultra FS struggles (LBS CAUSED 99%)

    If u have even a half decent LBS I wouldn't worry biktrix has a very fast and quick response time to issues I waited 3 days for my replacement hanger and it wasn't even listed on the website so I had to go through email support (the long route) I broke my chain just after getting my bike and...
  16. lordnox09

    my juggernaut ultra FS struggles (LBS CAUSED 99%)

    Yeah it still seems to be having the same issue between 20-30 it feels like a vibration but when I lean for a corner it gets stronger almost like a grinding feeling but with no sound but there is a resistance feeling slowing me down but the hub has good engagement for acceleration
  17. lordnox09

    my juggernaut ultra FS struggles (LBS CAUSED 99%)

    Waiting on my hanger to come tomorrow and can take it out for a spin still seems to be a small vibration but can. Only spin the tire by hand I just popped it off the rim and put it back on it's sealed on there good and the tire spins good and straight And are you meaning like hold the brake...
  18. lordnox09

    my juggernaut ultra FS struggles (LBS CAUSED 99%)

    I will run down and check that I did read that could be a problem but pretty confident I got it on right there is no part sticking out or wavy it's a 120 tpi case so went on super easy but will quick 5 min job I'll check it and get back to you
  19. lordnox09

    my juggernaut ultra FS struggles (LBS CAUSED 99%)

    I am still having some issue with it still after getting it back there is a vibration I can feel from 20-30km/h and i have re aligned my brakes so many times and it's more noticeable when I turn but it's coming from the back cause I can spin the tire on the stand and still get the same vibration