Search results

  1. P

    R&M Charger 3 - Laptop bag solution

    Hello, Anyone is carrying laptop 15" on bike and can recommend nice bag to buy ? Any hints appreciated, there are some, but not sure what's compatibile with Charger3
  2. P

    R&M Bosch power socket rubber cap - design flaw

    Hello, Do you also all experience this crappy rubber protector of charging socket ? I never can fit it to properly seal the socket after i unplug the charger, takes 5 minutes of manual trying to fit it to the socket holes. Any system which replaces that one to recommend ? Merci
  3. P

    Enviolo regulation screws what do they do

    perfect, thx a lot @JVBulman, ill check it out soon.
  4. P

    Enviolo regulation screws what do they do

    those are the ones on the handle bar, bottom side of enviolo knob screws ?
  5. P

    Enviolo regulation screws what do they do

    ah ok, so there's no adjustments, tightening the knob or anything ? asking because mine has some loose gap, where i can twist without efect, up and down, was thinking if i can tighten to make it more stiff
  6. P

    Enviolo regulation screws what do they do

    Hello I wonder what those screws under enviolo manette on handle bar do ? what happens when I turn those ? There are two I guess why
  7. P

    R&M Charger3 - Brake handle/lever - replacement part

    good question about left and right. for charger3 i see in specs Magura Mt4 and Mt5, mine broken is left one, yet not sure which one is that (mt4 or mt5)
  8. P

    R&M Charger3 - Brake handle/lever - replacement part

    Hi, Yesterday my bike fell down on unstable ground and tip of the left braking lever broke, fell off (see screen, outlined part broke off.., picture is random, not original part in my bike) Do you know what part i should buy to replace it ? is it whole brake mechanism on handle bar or just the...
  9. P

    Riese & Müller Charger3, Enviolo knob very stiff

    well the bike has some issues since then. it was taken to the shop for repair, and returned to me. immediately after handover i noticed that the enviolo shifter on handlebars didnt feel right, was still stiff after 10 seconds of ride and was limited comparing to 380% range, i could not achieve...
  10. P

    Riese & Müller Charger3, Enviolo knob very stiff

    Thank you for response Today service takes the bike for deeper look
  11. P

    [video attached] Riese & Müller Charger3, Drivetrain noise when motor OFF

    It was set up by a technician today so I didn’t do anything else
  12. P

    Riese & Müller Charger3, Enviolo knob very stiff

    hello, 1. yesterday during forest ride my enviolo knob on handle bar got really stiff, almost impossible to turn in any direction. with some force i was able to move it little bit but that was very weird. today a serviceman came to see the bike and he told me it was dirt on the enviolo cable...
  13. P

    [video attached] Riese & Müller Charger3, Drivetrain noise when motor OFF

    Hello, So far i had other ebikes where the operation without motor engaged was almost not audible or at least i though so, its my first bike with belt, not chain. Now with my new Charger 3, when motor is off and i pedal just with my muscles only, i hear the noise each half turn, check video...
  14. P

    R&M Charger3, corrosio frame possible ?

    So to paint or not to paint tiny scratch with bare metal visible ?
  15. P

    R&M Charger3, corrosio frame possible ?

    They have also offered 25% rebate for the bike, I’m good with them, the only thing for me was whether to accept their proposal of painting or not
  16. P

    R&M Charger3, corrosio frame possible ?

    what the dealer proposed is to sand it, paint professionaly and putting a sticker to cover the scratch in addition. on top of that they proposed to install the abus chain holder so overall the sticker/patch will not be visible. maybe its not that bad idea at all to make them do it, of course...
  17. P

    R&M Charger3, corrosio frame possible ?

    Thank you for the answer. Maybe I should take the sellers offer and let them paint it professionally
  18. P

    R&M Charger3, corrosio frame possible ?

    So finally would you recommend painting my scratch or it’s safe to leave it like it is ? I don’t cate d’or aesthetic side of it
  19. P

    Charger3 GT enviolo, noise/buzz without motor engaged

    Actually the noise I refer to is when motor is off. Maybe it’s only belt meshing with sprockets, I’ll record video for easier evaluation
  20. P

    Charger3 GT enviolo, noise/buzz without motor engaged

    Kind of feeling it and now thinking maybe it’s the belt meshing with cogs