Search results

I wrote Specialized and apparently not.

My first Ripcurrent (sold to a friend) had Microshift and I liked them better than Shimano. Seemed very tight and precise in the shifting. My present Ripcurrent came with the Shimano. They are mixing up the components.

Well, they finally sent me new Tektro e350 brakes and they were wired correctly ( the motor cutoff switch) so it was very easy to take the Logans out and put new Tektros in. They work much better than the Logans.

Thanks for your help. I specifically asked Juiced for a manual for the brakes. No luck finding them anywhere. I am guessing I might be able to pull the motor cutoff sensor out of the Logan housing and put it into a new Tektro housing to avoid having to wire it. Something I will try before...

Thank you for your very detailed reply. I have watched multiple YouTube videos on the subject and have tried multiple bleed methods. The bike has 250 miles on it. I have ordered a different "cup" with stopper to see if that is the problem. There is no information, manuals etc on Logan brakes...

My Logan front brakes remain spongy and need pumping to get them to work. I have done a gravity bleed and also did a top bleed releasing bubbles. Not working. Has anyone replaced these brakes with something else and, if so , what did you use. Need something with a motor inhibitor. Juice is...

This is the only mounting bar I could find that works with the New Como as the front stem very wide. Generic found on Amazon.

Added some items to my new Como 4.0. Gub cell phone holder, Motorcycle Bike Handlebar Mount for GoPro, and a ToPeak adapter for my trunk bag. For the ToPeak, I had to find a slightly longer screw to use with the mounting brackets (Lowes) and I used heavy duty nylon straps on the front.

I had the Navigator ( now sold) and had three broken spokes on the rear wheel. After paying for one, I learned to replace the other two. After that I had no problems with the spokes. It was an OK bike, my first. I moved up to better quality.

THX. I have the Saris and it is worst than the Yakima. Will look at the Kuat. The Omni Adapter on eBay is double and triple the usual price. Someone is taking advantage of the short supply. Looks like MIK is available.

1. Not hanging the bike.I use the Hollywood rack which has a bar coming down on the crossbar. 3. It is the Quick Rack by Topeak. I have a Topeak trunk which I use on 2 bikes. Who is going to want to buy Topeak accessories if they cannot provide the adapter needed to mount their products.

Where are you located? There are a bunch of new and older models at Eddys Bikes in Stow Ohio. I do not think they ship.

I just picked up my new Como 4.0 and have come across two problems so far. One was mounting the bike to a bike rack. I use a crossbar to hold the bike onto the rack. Because the news handlebar stem is so thick, it was very difficult to get the bar onto the stem. I have th Saris bar and that...

Picked up the new Como design and added the Mirrcycle mirror. The handlebars are not common in width or shape. Anyone have solutions for attaching a GoPro camera? I did find space for the GRUB phone carrier near the control buttons on the left. The right has a bell taking up the space.

Picked up my Como 4.0 today and got the Mirrcycle. THX

What mirror setup do you have on the NEW COMO design? Pictures please!!

The new Vado comes in at 58 lbs according to EBR. I have the older Como 5.o that is 53 lbs ( with battery)

Does anyone know the weight of the new 2022 Como? Interested in the 4.0.

How tall are you and what size bike did you get?

Here is my video on loading 2 bikes on a Hollywood rack. I now have the Como and a Juiced Ripcurrent S step thru which is 65 lbs without the battery. I take the battery out when loading and travel with the batteries in the car.