Changing Controller, NCM Prague

NcmPragueUser

New Member
Hello Guys,

i have a problem with my NCM Prague+. Sometimes, it does not give any motor support, and the display changes from full charge to depleted suddenly.

I have decided to order a new controler and change it, since i feel that`s propably the cause. Maybe someone can help with how to do this properly? Or if you have any ideas what could cause the problem otherwise, that would also be welcome.

Specs:


  • Display: Das-Kit, L6B,
  • Controller: Das-Kit, CT-D5-44, 36V 15A
  • Motor: Bafang, RX2, 36V
Thanks in advance!

I attached some pictures of the old controller, maybe someone finds something suspicious.
 

Attachments

  • 2e063217-4b36-44c3-a878-dd86e3ddd0a0.jpg
    2e063217-4b36-44c3-a878-dd86e3ddd0a0.jpg
    204.2 KB · Views: 48
  • 548fd8b1-a439-47df-9a85-91ef84b88217.jpg
    548fd8b1-a439-47df-9a85-91ef84b88217.jpg
    232.9 KB · Views: 46
  • bc68edcf-403c-4648-b9f2-eefee4d07ac3.jpg
    bc68edcf-403c-4648-b9f2-eefee4d07ac3.jpg
    225.9 KB · Views: 41
  • cbf778bc-135f-457f-b519-cd1e2a87eb7c.jpg
    cbf778bc-135f-457f-b519-cd1e2a87eb7c.jpg
    139.7 KB · Views: 39

Timpo

Well-Known Member
I think you will have much better luck posting this thread on NCM Forum