G062.1000.DC motor MOD

JTK77

Active Member
This is how my vented G062.1000.DC motor internals looks after I cleaned most of the old SHC100 grease off. Approx 1 year and 3000w peak power usage. Everything looks good ๐Ÿ™‚
Motor now cleaned, rewired higher awg+two sensor wires, regreased, rebuilt and temp sensor installed.
Big cassette hides that motor easily ๐Ÿ™‚
Did first test ride after putting this beast back together. Relatively easy run with some short full throttle accelerations resulted in ~15 degree temp rise (vs ambient) in windings (only small test run).
I will next upgrade the controller to ~50-60A (60v still). It will be interesting to see how the temp log looks after I have the bluetooth system up and running๐Ÿ˜…

Controller current Max updated to 64A so peak Power 4000w ๐Ÿ˜
 

Attachments

  • IMG_20220314_172641.jpg
    IMG_20220314_172641.jpg
    574.8 KB · Views: 98
  • IMG_20220310_205633.jpg
    IMG_20220310_205633.jpg
    238.8 KB · Views: 99
  • IMG_20220308_204409.jpg
    IMG_20220308_204409.jpg
    643.7 KB · Views: 82
  • IMG_20220308_204313.jpg
    IMG_20220308_204313.jpg
    656.1 KB · Views: 85
  • IMG_20220306_205230.jpg
    IMG_20220306_205230.jpg
    215.2 KB · Views: 76
  • IMG_20220306_153252.jpg
    IMG_20220306_153252.jpg
    269.2 KB · Views: 76
  • IMG_20220306_220526.jpg
    IMG_20220306_220526.jpg
    586.7 KB · Views: 99
Last edited:

Timpo

Well-Known Member
a little off topic, but those tires look much bigger than stock ones.

and still fits in the stock fender??
 

JTK77

Active Member
One step closer to adapt yet bigger power to the beast.
Aiming 60v 60A.
Bluetooth motor winding temperature logging system comes in handy ๐Ÿ‘Œ๐Ÿ˜Ž
 

Attachments

  • Screenshot_20220330-173128.jpg
    Screenshot_20220330-173128.jpg
    118.3 KB · Views: 33

dhealys

New Member
This is how my vented G062.1000.DC motor internals looks after I cleaned most of the old SHC100 grease off. Approx 1 year and 3000w peak power usage. Everything looks good ๐Ÿ™‚
Motor now cleaned, rewired higher awg+two sensor wires, regreased, rebuilt and temp sensor installed.
Big cassette hides that motor easily ๐Ÿ™‚
Did first test ride after putting this beast back together. Relatively easy run with some short full throttle accelerations resulted in ~15 degree temp rise (vs ambient) in windings (only small test run).
I will next upgrade the controller to ~50-60A (60v still). It will be interesting to see how the temp log looks after I have the bluetooth system up and running๐Ÿ˜…
I Know this is off the topic but what cassette or freewheel did you use.
 

JTK77

Active Member
AliExpress is cheaper, as you know.
It might take a while to arrive, but savings is worth it (for me, anyways).
Yeah that was first example from ebay. Best option depends on shipping prices and discounts. I paid 32.59โ‚ฌ with shipping (eBay). Now seems to Be 32.14โ‚ฌ. Ali was more expensive then and pretty much same price now (shipping 18.85โ‚ฌ)
 

Kyogiro

Member
Region
Europe
City
Paris (France)
This is how my vented G062.1000.DC motor internals looks after I cleaned most of the old SHC100 grease off. Approx 1 year and 3000w peak power usage. Everything looks good ๐Ÿ™‚
Motor now cleaned, rewired higher awg+two sensor wires, regreased, rebuilt and temp sensor installed.
Big cassette hides that motor easily ๐Ÿ™‚
Did first test ride after putting this beast back together. Relatively easy run with some short full throttle accelerations resulted in ~15 degree temp rise (vs ambient) in windings (only small test run).
I will next upgrade the controller to ~50-60A (60v still). It will be interesting to see how the temp log looks after I have the bluetooth system up and running๐Ÿ˜…
When you replaced your original G06 motor with the G062, was the replacement plug and plug and did you have to remove the whole thing (casing) and relace the new motor inside instead ?
 

JTK77

Active Member
When you replaced your original G06 motor with the G062, was the replacement plug and plug and did you have to remove the whole thing (casing) and relace the new motor inside instead ?
New motor needs to be laced to the wheel. Motor connector is L10 so not compatible with stock controller (or 35A controller).