GreenBike Electric Motion Big Dog Off Road - No power to LCD - lights work.

adamjaeger

New Member
Just took delivery this bike on Friday July 3rd. Unfortunately I can’t get it to power on. Battery is charged (3 green lights illuminate when I press the button on the battery), rear and front lights work, key in the on position, but the LCD will not display. Held the power button for 3 - 10 seconds And nothing. Am I missing something? I am waiting on a response from GreenBike Electric Motion but I thought I would give you guys a chance. Maybe there is something obvious I am missing. Great looking bike though....
 

rich c

Well-Known Member
Pull the electrical connectors apart, look for bent pins, then push them back together. Depending on the connectors, there might be arrows to align and a mark for how deeply they should engage. On one of my eBikes, I had to turn on the battery, the throttle, and the display. Check you instructions that you are initializing everything correctly.
 

adamjaeger

New Member
Pull the electrical connectors apart, look for bent pins, then push them back together. Depending on the connectors, there might be arrows to align and a mark for how deeply they should engage. On one of my eBikes, I had to turn on the battery, the throttle, and the display. Check you instructions that you are initializing everything correctly.
Thank you. Great advice - it was a LCD that was not connected, confirmed no bent pins. Sadly I am seeing e10 errors now. I have been able to ride the bike but when the battery gets to about 50% the bike will die (totally dead, can’t even get a status on the battery). I’ve been able to revive the bike by just having it sit, for a while or starting a new charge. I talked to GreenBike Electric, they have been super helpful and sending out a new battery, controller, lcd and cabling. I feel like it could be the battery or controller at this point but curious what eveyone thinks.