Help me please . Urban belgocycle

Claudiu

New Member
Region
Europe
Hello. I have this electric bike with a 250 Watt Bafang G310 motor. For 2 seconds, an error appeared on board (E-13) and then disappeared. After that, the engine doesn't help me pedal at all. I mention that the dashboard works normally, the battery is full, but it only works like a normal bike ... can anyone help me with any information please? thanks a lot
20210216_175737.jpg
 

Timpo

Well-Known Member
And I can do sometyng with that, or I have to change the batery? 😬

And I can do sometyng with that, or I have to change the batery? 😬
I'm not qualified to give you this advice, as I'm a complete amateur.
I'd take it to your local battery rebuilder (if you have one).

I looked around on AliExpress, looks like temp. sensor is attached to your BMS.

It's either your battery was overheating, or temp. sensor was faulty.
Image result for ebike battery temperature sensor
 

Claudiu

New Member
Region
Europe
I'm not qualified to give you this advice, as I'm a complete amateur.
I'd take it to your local battery rebuilder (if you have one).

I looked around on AliExpress, looks like temp. sensor is attached to your BMS.

It's either your battery was overheating, or temp. sensor was faulty.
Image result for ebike battery temperature sensor
Thanks a lot for the information 😃