Sheng Milo MX02S

Fergie44Essex

New Member
Region
United Kingdom
Hi All

I am in desperate need of advice or help, my Sheng Milo MX02S has appeared to have lost all power, even though the battery appears to be fully charged and the LCD screen turn on but press the throttle and nothing!, Does anyone know of a place to purchase a like for like replacement for the 1000W motor controller or a service centre that can help in the repair of the bike?
 

SpanishFlyer

New Member
Region
Europe
Dear friend,
The bike won't run, but does the display show anything or is it also dead?
If it isn't working, it could be a faulty display. In that case if you can grab hold of a display by-pass like the one shown on the attached photo, you can try and have the bike running again (just as a test), because you will only have a throttle and brakes, but no light, horn. If the wheel turns you know you need a new display. One word of caution though... The dead display could be caused by other fault in the system and installing a new one could get damaged the same way your first one did..
 

Attachments

  • 5 BY-PASS PLUG CONNECTED.jpg
    5 BY-PASS PLUG CONNECTED.jpg
    863 KB · Views: 18