Hi all, I purchased an ST1 Platinum this past Saturday and it is having some issues with the display. When disconnect the battery and turn on the display, the display works correctly and has no issues. However, when I insert the battery into the bike and turn on the display, the display is no longer legible. With the battery plugged in the digital display cannot be read, only if I tilt the display at a 45 degree angle. I checked the display cables for any debris but the display stayed the same. Since the display works correctly without the battery plugged in, I doubt the display is the issue. My thoughts are that the issue may be with one of the wires or the battery but so far I am unable to fix it. I attached pictures of the display.