Supercharger GX Rohloff HS belt tooth count?

tompat

Active Member
What's the tooth count on a Gates Carbon CDX belt that fits the Supercharger GX Rohloff HS?
I'm racking up miles on my bike and like to get a spare one. The markings on the belt are unreadable by this point.
 

Alaskan

Well-Known Member
The tooth count on my Nevo Nuvinci GH is 113. I had to count them. Put a pencil mark on the top of one tooth then start counting along the bottom of the belt. You will have to advance the belt with the crank a few times. Make a smaller mark on the last tooth you count before advancing the belt to the next stretch.
 

tompat

Active Member
It should be written on the belt along with the Gates Carbon Belt branding/logo.
The Nevo is a full suspension and probably has a longer belt.

I can no longer read the markings due to wear. I think it says 11M-108T-12C but cannot be sure. 108 in this case would be 108 tooth version.
 

Alaskan

Well-Known Member
The Nevo is a hard tail with front fork. The markings were illegible on mine as well, by the time I went to read them, necessitating a count .