Trek Allant+7s freewheel hub

folmonty

Member
Region
USA
City
Nor CA
Anyone know how to remove the freewheel hub to grease the inside? I've removed the cone nut, washer and lock nut on the non-dive side. Not enough clearance on the drive side as the freewheel hub extends over the axle. Trek uses Bontrager alloy, sealed bearing, 6-bolt, 135x5mm QR hub on the Allant 7 and 8 series. Tru-axles only on the 9. This is what it looks like. Thanks in advance for any help! 🙏
image2.jpeg
image3.jpeg
image4.jpeg