Which cassette tool? FR-5, FR-5g, or FR-1.2, NeoJumper

Mtnm

Active Member
I'm unsure of which is the correct Cassette Removal tool to order for my NeoJumper.

Shimano type:
FR-5 12 spline, 23.4 mm
FR-5, 12 spline, 23.4 mm with guide pin
FR-1.2 12 spline, 23 mm

Any advice is much appreciated.

Mike
Colorado, USA
 

Shea N Encinitas

Active Member
I'm pretty sure I have the middle one W the guide pin, has worked on 6 different bikes since I bought it years back. If you can, take the wheel to the bike shop just ask and test fit the tool. -S
 

Ravi Kempaiah

Well-Known Member
I'm unsure of which is the correct Cassette Removal tool to order for my NeoJumper.

Shimano type:
FR-5 12 spline, 23.4 mm
FR-5, 12 spline, 23.4 mm with guide pin
FR-1.2 12 spline, 23 mm

Any advice is much appreciated.

Mike
Colorado, USA


Contact johnp@easymotionbikesusa.com

He is the tech guy and quite knowledgeable. When I had a doubt, he was kind enough to go to warehouse and take a video for me. Very helpful.

Before ordering these tools, you might want to contact your LBS because for them it's very routine and a tune up generally involves cleaning of the cassette. They can certainly fix this up.
 

Mtnm

Active Member
Thank you for the suggestions.
My "local" bike shop is 50 miles away, so you can guess I end up trying to figure out most things on-line and doing it myself.
 
Last edited:

Mtnm

Active Member
e-motion indicates the tool without the guide pin should work (so the Park FR-5 should be OK).
They do recommend going with the Pedro tool.