Total Weight:
55 lbs (24.94 kg)
Battery Weight:
7.5 lbs (3.4 kg)
Motor Weight:
7.1 lbs (3.22 kg)
Frame Material:
Alpha Smooth Aluminum Alloy
Frame Sizes:
17.5 in (44.45 cm)19.5 in (49.53 cm)21.5 in (54.61 cm)23.5 in (59.69 cm)Geometry Measurements:
44cm Small Step-Thru Measurements: 44.5cm Seat Tube, 63.5cm Reach, 44.5cm Stand Over Height, 83.8cm Minimum Saddle Height, 63.5cm Width, 188cm Length, 114.3cm Wheelbase
Frame Types:
High-Step, Step-Thru
Frame Colors:
Trek Black, Teal
Frame Fork Details:
Aluminum Rigid, 100mm Hub Spacing, 9mm axle with Quick Release Skewer
Frame Rear Details:
135mm Hub Spacing, 9mm Axle with with Quick Release Skewer
Attachment Points:
Rear Rack Mount, Fender Mounts, Bottle Cage Bosses
Gearing Details:
9
Speed 1x9 Shimano HG200 11-36T Cassette, Shimano Alivio T4000 DerailleurShifter Details:
Shimano Alivio M4000 Triggers on Right (One-Way High Lever, Three-Shift Low Lever)
Cranks:
Prowheel, Aluminum Alloy, 170mm Length, 38 Tooth Steel Chainring with narrow-wide teeth and Full Alloy Guard
Pedals:
Bontrager Satellite City, Molded Plastic with Reflectors, Steel Core
Headset:
Threadless, Sealed Cartridge Bearings, Straight 1-1/8"
Stem:
Bontrager Aluminum Alloy, Adjustable Angle, 31.8mm Clamp Diameter, Blendr Compatible
Handlebar:
Bontrager Aluminum Alloy, Comfort Sweep Low-Rise, 670mm Length
Brake Details:
Shimano MT200 Hydraulic Disc with 160mm Rotors, Dual-Piston Calipers, Three-Finger Levers with Adjustable Reach
Grips:
Bontrager Satellite Elite, Rubber, Ergonomic, Lock-On
Saddle:
Bontrager Boulevard
Seat Post:
Trek Pavement Suspension, 40mm Travel, Aluminum Alloy with Steel Core, Preload Adjust, 2-Bolt Saddle Clamp
Seat Post Length:
300 mm
Seat Post Diameter:
31.6 mm
Rims:
Bontrager Connection, Aluminum Alloy Double Wall, 32 Hole
Spokes:
Stainless Steel, 14 Gauge, Black with Nipples
Tire Brand:
Bontrager E6, 700x50c (50-622)
Wheel Sizes:
28 in (71.12cm)Tire Details:
30 to 60 PSI, 2.1 to 4.2 BAR, 60 TPI, Hard-Case Lite Puncture Protection
Tube Details:
Schrader Valve
Accessories:
MIK-Compatible Alloy Rear Rack with Pannier Hangers and Standard Gauge Tubing (25kg/55lb Weight Limit), Blendr Compatible Stem, Plastic Fenders with Toe Strike Guard on Front, Black Foam Slap Guard, Rear-Mounted Adjustable Length Kickstand, Fork-Mounted Hermans H-Black MR4-E Integrated Headlight (120 Lumens), Carrier-Integrated Spanninga SOLO Backlight (35 Lumens)
Other:
Locking Removable Downtube-Integrated Battery Pack, Bosch Range Boost Compatible, 1.3b lb 2 Amp Bosch Compact Charger, Maximum 105 RPM / 270% Motor Support, ABUS Locking Core, KMC X9 Chain, Maximum Total Weight Limit 300lbs (136kg)
Bruce
4 years agoTrek does allow “Walk mode” on some of their Ebikes. i have a 2020 Powerfly 5 Ebike and it is available to use. Maybe for 2021 models they are inactivating it.
ReplyAsk Court to get you a device so you don’t have to ride one handed all the time with your arm extended. It looks pretty dangerous with cars whizzing by you.
Tyson Roehrkasse
4 years agoGood to know about the walk mode, I’ve heard from some Verve+ 3 owners in Canada that walk mode works there as well, so it seems to vary by region. The Verve+ 2 I reviewed last year had the same restriction as well.
I do have a chest mount that I use sometimes depending on where I am and the type of riding, but I do feel pretty safe in Fort Collins. I’ve been cycling there for almost 20 years now and the city is very bike friendly :)
ReplyDavid Bannister
4 years agoThis is an excellent and accurate review based on my experience as an owner for 2750 kilometres. I am in Canada, where the price is $3999, and the lights on/off and walk features are enabled.
ReplyThe bike is very smooth to operate but does have a stiff/sometimes jarring ride. I have added both a Redshift ShockStop stem and seat post, and the ride is now wonderfully smooth by comparison- especially since I ride the Verve at least as much off-road on gravel and grassy trails as I do on pavement. It does provide lots of exercise compared to a bike with a more powerful motor… I like this; looking to get in better shape at 65. I am very happy with this bike, it has been trouble-free for me and my local Trek shop has been great to deal with.
One other change I have just made is to remove the long chain guard. I prefer to have better access to the chain for service. I am looking into getting the chainring guard for an Allant to replace it, or just go without a guard.
Thanks for the great review Court, there aren’t many out there for this bike.
Tyson Roehrkasse
4 years agoHi David, thanks for commenting! I’m glad to hear you’ve been enjoying your Verve+ 3, adding the extra suspension sounds like a nice upgrade – especially if it can handle off-roading now! I’ve heard from a few other owners that they removed the chain guard as well.
ReplyJohn Charles
4 years agoThis bike has gone from 45lb to 55lbs over 2 years! Is this because of the bigger motor or is the extra weight the reasoning for the extra boost? What gives? I rode the first generation and thought it seemed quite light and nimble. Has it lost some of that ‘regular’ bike feel?
ReplyTyson Roehrkasse
4 years agoGreat question! The original did have a lighter motor and battery (combined 11.8 pounds) vs the newest model (combined 14.6 pounds). So there’s roughly 3 pounds of weight difference to start with.
Some other factors that would affect weight:
– The original did not include a rack or a chain guard
– The original had a narrower kickstand
– The original had a smaller directional headlight integrated into the frame (vs a separately mounted light on the Verve+ 3)
– The tires on the original are 700x45c (vs 700x50c on the Verve+ 3, slightly wider diameter)
Another possible factor is that the original model we reviewed was a high-step frame, and for the Verve+ 3 I had a low-step frame. Also, since the newest version of the bike is Bosch Range Boost compatible, it presumably has some extra electronics hardware inside the frame for making that magic happen.
Oh, and the original seatpost was 27.2mm in diameter, vs 31.6mm on the Verve+ 3!
I think that’s about all the contributing factors I can think of :)
ReplyDon Helms
4 years agoI noticed a bell on the Verve +3, what is the brand and where can I get one? I have a Verve +2 and need a bell. Thanks!
ReplyTyson Roehrkasse
4 years agoThe bell doesn’t have a brand on it that I remember… I actually completely forgot to mention it in my review! It’s a standard flick bell, so any bike shop should have one like it. If you want the exact same one you’d probably have to get it from a Trek shop :)
Replypaul clifford
4 years agoHi there,
Looking at the Trek website, the spec of the bike is different to the review. I can spot 3, the motor, the battery where Trek say 400w and the review says 500 and the saddle.
Can you clarify?
Thanks. Paul
ReplyCourt
4 years agoHi Paul, we try to measure everything by hand and blend what the bike brand lists or says on their official websites with what we hear from manufacturers (like Bosch). The official listings are that the motor is 250 watts (they don’t estimate a peak) but we think it’s above 400 watts… and we know that the torque is listed at 50 newton meters. The saddle and other accessories might change over the course of a year, believe it or not. There have been some supply chain issues this year that have caused delays and other times companies will just upgrade things based on designer input. I hope this helps, and I appreciate your comment :)
Replypaul
4 years agoThanks for the reply. I can see the difference is down to the US and EU specs are different.
The US bike has an upgraded battery and motor compared to the EU one. The EU one is more expensive which I find a little odd.
Paul
Brendan
4 years agoGreat review, Tyson. Thanks!
Both this review and the earlier review of the Trek Verve + 2 mention that the Bosch Active Line motors are torque-sensing motors which work best for more active riders. I’m in reasonably good physical shape but I’m also 72 years old and I haven’t ridden in years. I want to get back into cycling for exercise but its going to take me a while to get back into good cycling condition. Do you think the more demanding Bosch torque-sensing system work for me? Or would it be better to start with an e-bike with a cadence-sensing system?
ReplyCourt
4 years agoHi Brendan! Bosch uses an advanced multi sensor that measures cadence, rear wheel speed, and torque. It’s one of the most natural and reliable systems around. If you click up to the highest levels of assist, this should be satisfying and not create too much strain for you. I think it’s actually a really good fit in terms of power, efficiency, and lower noise if you are just riding around town. Bosch makes higher powered products for mountain biking, such as the Performance Line CX motor, which can be found on some of the other products we’ve covered here :)
ReplyBrendan
4 years agoThanks Court,
I’ll be doing most of my riding on the American River Bike Trail here in the Sacramento area, and that trail only drops 500 feet of elevation over 20+ miles. So it sounds like the Bosch would give me all the boost I need until I get my cycling legs back.
Dan
4 years agoI test rode the Verve+3 and loved it. Will wait for the 2021. Do you think there is any differences with the standard frame 2021? And, a big bummer was the seat would ROCK back and forth. In fact, all the Trek electric bikes had this problem which actually stopped me from buying it in the shop that day. Is this a known issue and should it be something to be concerned about?? Thanks.
ReplyCourt
4 years agoHuh, that’s interesting. I’m really surprised to hear about the saddle rocking… almost makes me wonder if they are using a system that intentionally does that for ergonomics or comfort? Do you think it has more to do with cheap hardware or not being tightened or something? Weird. Anyway, I have seen one 2021 Trek model, and you can check the review here, but that’s a super high-end model and might not reflect everything in the lineup. It really seems like they are getting better about standardizing parts and working the little kinks out of each model.
ReplyRobert Balch
4 years agoI just picked up a brand new from the factory verve+ 3. The walk feature works, BUT you need to:1 have a mode selected (eco, turbo, etc); 2. push the Walk button and then 3. push and hold the + button. the manual also talks about turning the lights off with some combination of button pushing.
ReplyCourt
4 years agoInteresting, thanks so much for this feedback Robert! I’m glad to hear that it’s working. I have noticed that some companies change their settings mid-season (or depending on the location). I’ve also heard that some shops can help adjust settings for major drive systems and displays (like Bosch here). Hope you enjoy the bike! It’s great to know that it can indeed work with walk assist!
ReplyPia Martinus
4 years agoI live in Uk and wondering about buying either this bike, the Verve 3+ , or the Verve 4+. Do you have any thoughts on this?
ReplyCourt
4 years agoHi! That’s a great question. While I’m not super familiar with the UK ebike market, I am a fan of Trek products in general. I own a non-electric Trek that has worked well, and I love their shops and customer service. Honestly, I feel like this brand has done an excellent job with their products in North America, offering reliable electronics from Bosch and a good range of frame sizes and colors. Depending on your budget and style preferences, I feel like either the Verve 3+ or 4+ would be a great choice. For comparison, you could explore CUBE and BULLS.
ReplyDavid Barbour
4 years agoLove this bike. The pedal assist is barely noticeable in its operation it just works and riding up hills is effortless but it still feels like you are pedaling a bike instead of being pushed up hill like other bikes feel. Beautiful bike overall.
ReplyMy one gripe has to do with fit and finish. My Trek looks nice, however my wife has the exact same bike but hers has very noticeable, messy welds and her battery is crooked which not only looks bad but also may make it vulnerable to rain and dirt as the gasket does not fit properly. We’re taking it back to the shop to see how well Trek stands behind their bikes. Hard to imagine such sloppy work on such an expensive bike.
Tyson Roehrkasse
4 years agoHi David, thanks for sharing this info! Trek has a good reputation for taking care of things like that, I hope they make it right for your wife’s bike. Do let us know afterwards :)
ReplyJason Morris
4 years agoGreetings. I am a fit 48 year old and I have a Trek Verve +3 on order. I plan to use the bike for a short commute to work and fun rides. I have recently read some excellent reviews on the Specialized Turbo Vado 4.0 (including this site) and I am re thinking my choice. I really do like to ride in a more upright, non aggressive position. Any thoughts on bike choice between these 2?
ReplyCourt
4 years agoHi Jason! Trek and Specialized are the two leaders in the industry right now, in my opinion, based on the quality of their bikes and wide network of dealers to provide fitting and support. My personal favorite is the Specialized Vado SL (super light, smaller motor) models. I don’t love their standard Vado with the Brose motor… but it is more powerful (much like the Trek Bosch powered models). Now keep in mind that I’m only 135lbs and an active cyclist. If you want a bit more power and range, I’d go with the Trek. The Verve+ 3 is an awesome ebike and I think Trek has the upper hand with dealer experience because they own many of their stores and are super professional. I also just feel that Bosch is more proven that Brose and I prefer their displays and apps, there are way more options, they really do a great job. If you want light, efficient, and a bit more sporty (which it sounds like you may not, considering the upright relaxed comment) then the SL is worth considering but may be out of stock. I hope this helps! It sounds like you’re on the right track ;)
ReplyJackie Gamache
4 years agoOMG… what a bike, the Verve+3 low step. So so happy smooth shifting eco turbo sport comfortable! Life is GOOD, you did a nice job building this Bike. Thank you, happy peddling stay safe
Jackie, from the Villages in Florida
ReplyCourt
4 years agoThanks for such a friendly and positive comment Jackie! Life must be good for you down at the Villages in Florida, I’ve never been before but will definitely put it on my list of happy places to visit someday :D
ReplyCarsten M.
4 years agoHi Court and Tyson!
Really good review, Tyson! Have owned the Verve+ 3 for a year now and while pondering the advantage of a front suspension (i.e. Allant+ 7) I ultimately decided not to upgrade. There must be a reason that the more expensive models do not feature front suspension. I’m 6’5″ @ 255 lbs and the bike does everything extremely well. It doesn’t pretend to be something it isn’t (e.g. speed bike, off-roader, etc.) and even at my weight plus some luggage, I get over 80 miles range in ECO mode. For anyone who wants to be active and not just push a throttle, I think the Active Line Plus motor is a superb choice and great match for this versatile bicycle. I would love to get ride of that giant chain guard myself but haven’t found a suitable alternative; perhaps another viewer can chime in.
Love all your reviews for their clarity, details and honesty – great work, guys, keep it up :)
ReplyTyson Roehrkasse
4 years agoHey Carsten, glad you’re enjoying your Verve+ 3! Suspension is nice but for city riding it can be a bit overkill. I have seen some discussion about replacing the chain guard on our forums, here is a relevant thread with some helpful info :)
ReplyJohn dougherty
4 years agoBest review I have ever seen.
ReplyTyson Roehrkasse
4 years agoThanks John! I’m glad you found us and that this review was helpful :)
ReplyJohn Dougherty
4 years agoTyson, I have been a fan of Trek for some time and now ride a Domane HP+7; it took five months to get the bike, but worth the wait. My LBS actually has two Verve +3 bikes in stock and based on your excellent review and Trek’s reputation, I am buying one tomorrow for our daughter. Everything you mentioned about the torque sensing on the Bosch system and Trek’s standard of quality matches my experience. Quite frankly, I am a little surprised that they can sell this bike at this price considering the components. I recently emailed John Burke and said I was impressed by the fact that Trek didn’t raise prices due to demand. As far as I know, other manufacturers have been fair as well.
Lars Andersen
4 years agoDoes the low step version provide a more upright seating position than the high step version of the same same bike?
ReplyCourt
4 years agoHi Lars! You could ask the dealer and study their geometry charts to see how reach, head tube angle, and stem + handlebar might be setup slightly differently between the high-step and step-thru, but my guess is that they are very similar or the same. I think the idea is to preserve the geometry while providing a more approachable frame with the step-thru or mid-step models. This often reduces frame stiffness and adds weight, but those are the two main trade-offs that I’m usually seeing.
ReplyJB
4 years agoSeveral issues in first year of ownership (not even one year yet)..
-Battery compartment was not setup properly, required call to Trek from bike mechanic to fix.
-Cheap plastic mud flap brace broke with tiny accidental kick by foot – bike almost unusable, required overnight stay in bike hospital.
-Chain began to jump, again bike unusable (still no answer on what that is).
I have a bike that cost less than a third of this that is 20 years old and has been in the shop 3 times lifetime with zero emergency mechanical issues.
ReplyI have less confidence in Trek than ever before.
Tyson Roehrkasse
4 years agoHi JB, sorry to hear that you’ve been having some issues with your Verve+ 3. I can’t comment on the first two, but for the last one (the chain jumping off), I have a recommendation. I’ve heard of this happening for a lot of Verve owners, it’s a known issue with the chainring. If you take it in to a Trek dealer they should swap it out for an appropriate narrow-wide chainring for free, and that should fix the issue.
here’s a discussion on our forums about it: https://electricbikereview.website/forums/threads/trek-verve-2-chain-is-constantly-slipping.35298/
ReplyLiz
3 years agoI just bought the Trek Verve+ 3 less than a week ago and have ridden it several days since then. I have noticed progressively loud rattling, I thought it was the chain guard, and I was going to ask if it could be removed. Today I rode the bike about 15 miles and the rattling was terrible, I thought the whole bike was going to break. I put my hand on the battery and it was shifting around a lot. I removed the battery and replaced it a couple of times, but it did not help. When I got home I removed the battery and tried to put it back in place several more times. When I would put it in place it would not snap in place like it had before, I had to turn the key to hold it in place. When I did that the whole battery shifted to the left, and left a gap at the top between the battery and the frame. I rode the bike down the street, and the rattling was greatly improved, but now I can’t get the battery out of the bike. When I look inside the keyhole I see that it is not lined up. I remember in the store, my sales person (who seemed to have minimal knowledge about the bike, he would evade questions and a couple times another salesperson overheard and stepped in with the answers) had trouble turning the key to remove the battery. So far, I am very displeased with my experience in regards to the bike.
ReplyTyson Roehrkasse
3 years agoHey Liz, thanks for sharing your experience! I can understand your displeasure :( have you taken it back in to the dealer yet? I imagine this will be covered under warranty, hopefully Trek makes it right for you.
ReplyMarjorie Doherty
3 years agoHi. Thanks for the review. I currently have a 2019 Specialized Como 3 that I’m considering replacing with this Trek. It appears to me that the specs are fairly similar. The reason for the change would be the fit of the bike – the XS Trek seems to fit my 5′ tall body a bit better and feels a quite bit more agile. My question pertains to the motors. I live on a VERY long hill and my Como does fine getting me to the top. Will the motor in this Trek have similar power to help me climb the hill home? Thanks for your help!
ReplyCourt
3 years agoHi Marjorie! There are a lot of factors to consider, but on average I would say that most current-gen mid-drives can climb effectively if you shift to lower gears when climbing a steep hill. Bosch has some of the best motors, which Trek uses, and your older Specialized Como probably used a Brose (which is also a leader). I saw that you’re also looking at Gazelle ebikes, which come in many sizes. I hope you find something you like and welcome any other questions :)
ReplyMarjorie
3 years agoThanks Court. It seems that most of the LBS’s in my area are getting bikes with the Active Line Plus motor, so I’m glad to know that it’s likely adequate. Always appreciate your knowledge!
Bernadette S.
2 years agoI have a Verve+ 3, and the walk function does work. First press the top button to turn on the unit. Press the bottom button and you’ll see WALK. You have to press (and keep pressing) the + button to start the walk function. If you let go, the walk function stops.
ReplyCourt
2 years agoThanks for this clarification Bernadette! Perhaps I got mixed up, your instructions are great :)
ReplyBernadette S.
2 years agoOh no problem! Glad I could help!