Total Weight:
40 lbs (18.14 kg)
Battery Weight:
5 lbs (2.26 kg)
Frame Material:
Alpha Gold Aluminum
Frame Sizes:
17.7 in (44.95 cm)19.6 in (49.78 cm)21.6 in (54.86 cm)Geometry Measurements:
Medium: 18" Seat Tube, 22" Virtual Top Tube, 15" Reach, 23" Stand Over Height, 32.5" Minimum Saddle Height, 27.25" Width, 43.5" Wheelbase, 72.25" Length
Frame Types:
Mid-Step
Frame Colors:
Satin Trek Black, Blue Sage, Satin Mulsanne Blue
Frame Fork Details:
Rigid, FX+ Aluminum Alloy, Internal Brake Routing, Fender Mounts, Rack Mounts, 100mm Hub Spacing, Thru-Skew 5mm Hex Bolt-on 9mm Skewer
Frame Rear Details:
144.5mm OLD Hub Spacing, 12mm Threaded Keyed Axle with 10mm Flats, 5mm Hex Bolt-on
Attachment Points:
Rear Rack Mounts, Fender Mounts, Bottle Cage Mount, Frame Lock Mounts
Gearing Details:
9
Speed 1x9 Shimano Altus M2000 Long Cage Derailleur, 11-36 Tooth Shimano HG200 CassetteShifter Details:
Shimano M2010 Triggers on Right (One-Way High, Three-Shift Low)
Cranks:
Forged Aluminum Alloy, 170mm or 175mm Length Arms, 42 Tooth Narrow-Wide Steel Chainring with Aluminum Plastic Guard
Pedals:
Bontrager City, Plastic Resin Platform
Headset:
Integrated with Internal Wire Routing, 1-1/8" Straight
Stem:
Aluminum Alloy, 90mm or 100mm Length, 7-Degree Rise, 31.8mm Clamp Diameter, One 10mm Spacer, One 20mm Spacer, One 20mm Tapered Plastic Base Spacer
Handlebar:
Aluminum Alloy, Low-Rise, 15mm Rise, 660mm or 690mm Length
Brake Details:
Shimano or Promax Hydraulic Disc with 160mm Rotors, Dual Piston Calipers, Three-Finger Levers with Adjustable Reach
Grips:
Bontrager XR Endurance Comp, Ergonomic, Inner Lock Ring
Saddle:
Bontrager Sport, Women Specific
Seat Post:
Bontrager Aluminum Alloy, 12mm Offset, Two-Bolt Clamp
Seat Post Length:
330mm, 400 mm
Seat Post Diameter:
31.6 mm
Rims:
Bontrager Connection, Aluminum Alloy, Double Wall, 622 x 20, 32 Hole
Spokes:
Stainless Steel, 14 Gauge, Silver with Adjustable Nipples
Tire Brand:
Bontrager H2 Comp, 700x40c (40-622)
Wheel Sizes:
28 in (71.12cm)Tire Details:
30 TPI, 55 to 85 PSI, 3.8 to 5.9 BAR, Reflective Sidewall Stripe
Tube Details:
Schrader Valve
Accessories:
Tool-Free Adjustable Length Rear-Mount Kickstand (18mm Spacing), Plastic Fenders (50mm Width), Aluminum Alloy Rear Rack (MIK, 25kg 55lb Max Load, Bungee Loops), Integrated Headlight on Stem (Side Windows), Spanninga Solo Integrated Rear Light (2 LED), Clear Plastic Sticker Slap Guard, Plastic and Steel Chain Cover (Black), Basic Flick Bell, Optional Range Extender Battery Pack (Mounts on Top of Downtube, 250wh Capacity)
Other:
Internally Mounted Battery (Removable for Repair or Replacement By Detaching Bottom Bracket), Delta Electronics 1.3lb 2 Amp Charger 42 Volts, KMC X9 Chain, 300lb (136 kg) Maximum Combined Weight
Richard Stallard
2 years agoAny comments on the smoothness of the motor assist? My wife has a Fx+ 2 high step model and finds the boost is too strong at low speed such as when maneuvering through an intersection over curbs, ramps, etc. After closer observations, we concluded the boost seemed to switch on/off in response to rider torque rather than the boost being proportional to rider effort, for example with the Trek Verve+ 2 bike with Bosch drive. Overall, we were disappointed that the Fx+ didn’t appear to be fully utilizing the capabilities of the torque sensor. We asked our Trek dealer to dial down the lowest boost level, which was easy for them to do. However, my wife still prefers to switch the boost off for low speed maneuvering situations.
ReplyCourt
2 years agoHi Richard! It’s interesting to read your comment about assist, and how the torque sensor might be less dynamic than Bosch and others. This was my experience as well, the torque sensor didn’t activate motor power as instantly as I had hoped, and I didn’t notice a variation of assist as much as low, medium, and high for each of the assist levels. It seemed much more like a traditional cadence sensor, and most of my rides were conducted using the highest level of assist. Thanks again for sharing your perspectives. My video review is now embedded on the page and live on YouTube so you can hear and see more thoughts realtime as I rode!
ReplyRichard Stallard
2 years agoLike you, I was a bit anti hub motors because I thought they missed out on the gearing of the chain drive to increase torque, but then it dawned on me that even the lowest gear on most e-bikes with 1x gearing is more than 1:1 (e.g. 42:36 or 44:42) so the torque of a mid-drive motor is actually reduced by the time it gets to the back wheel, whereas the hub motor always has 1:1 torque factor.
ReplyCourt
2 years agoHi Richard, that’s a good point. I wouldn’t say I’m anti-hub motor, just recognizing the trade offs between different setups! I appreciate that hub motors can work even if the chain breaks or there is some other drivetrain issue with the cassette, derailleur, or chainring. I like how well they pair with throttle systems, and I definitely appreciate how inexpensive they can be. That said, it makes wheel maintenance more difficult because of the power cable, and adds unsprung weight if it’s a suspended wheel. It can also increase wear and tear on the drivetrain (chain etc.) unless there’s shift detection in place.
ReplyMartel Ame
2 years agoI bought mine like almost 2 months ago. My FX+2 sometimes doesn’t assist even I turned on my electric assist. I need to turn off and turn on like once or twice before it assists. Sometimes when it assists when I turn it on first try. Sadly, I find it hassle when I need to off and on multiple times before electric assist can read my pedaling. Did you experienced it as well?
ReplyCourt
2 years agoInteresting, I did not experience this during my test ride Martel. However, I got a brand new model and only spent a day riding it. Perhaps there’s a loose connection from the battery to the motor controller? One of the big benefits of buying any Trek or Electra model is that they have a lot of dealers around the US and Canada. If you happen to be near one, I’d definitely take the bike in for a tuneup, maybe there’s even a new firmware they could load that would help! Sorry to hear about the issues, but I hope you can get them resolved and enjoy the bike as it was intended without issue.
ReplyGerard
1 year agoHi, I wondered if you got this resolved? My wife has the same issue on and of on her Fx+.
Regards, Gerard
Reply