Total Weight:
48 lbs (21.77 kg)
Battery Weight:
5.5 lbs (2.49 kg)
Motor Weight:
8.4 lbs (3.81 kg)
Frame Material:
6061 Aluminum Alloy
Frame Sizes:
16.5 in (41.91 cm)17.5 in (44.45 cm)19 in (48.26 cm)Geometry Measurements:
Step-Thru: 16.5" Seat Tube, 23" Reach, 27" Stand Over Height, 71" Length, High-Step Medium: 17.5" Seat Tube, 23" Reach, 30" Stand Over Height, 71" Length, High Step Large: 19" Seat Tube, 23" Reach, 31" Stand Over Height, 71" Length
Frame Types:
High-Step, Mid-Step
Frame Colors:
Flat Black
Frame Fork Details:
Rigid 6061 Aluminum Alloy, Custom Geometry (Interchangeable with Suspension Fork), 9 mm Quick Release Skewer
Frame Rear Details:
135 mm Length, 10 mm Threaded Axle with Nuts
Attachment Points:
Rear Rack Bosses, Rear Fender Boss, Bottle Cage Bosses
Gearing Details:
9
Speed 1x9 Shimano Altus Derailleur, 11-34T CassetteShifter Details:
Shimano Triggers on Right
Cranks:
170 mm Length, 52 Tooth Chainring with ABS Plastic Guard
Pedals:
Wellgo Aluminum Alloy Platform
Headset:
Neco, Threadless Integrated 1 1/8"
Stem:
Frank Alloy 80 mm, 6° Rise
Handlebar:
Frank Alloy Low-Rise, 27" Length
Brake Details:
Shimano BRM375 Mechanical Disc with 180 mm Rotor Front, 160 mm Rotor Back, Wuxing Levers with Motor Inhibitors
Grips:
Generic Flat Rubber
Saddle:
Selle Royal Free Way
Seat Post:
Frank Aluminum Alloy
Seat Post Length:
300 mm
Seat Post Diameter:
27.2 mm
Rims:
Double Wall, Alloy with Reinforcement Eyelets, 36 Hole, Flat Black
Spokes:
Stainless Steel, 12 Gauge Rear Spokes, 13 Gauge Front Spokes, Silver
Tire Brand:
Kenda, 700 x 45c (28" x 1.75")
Wheel Sizes:
28 in (71.12cm)Tire Details:
50 to 95 PSI
Tube Details:
Schrader Valve
Accessories:
Optional Trigger Throttle ($99), Optional 20 mph Speed Limiter for Class 2 (Canada, Australia), Optional 8 Amp Quick Charger from Grin Technologies ($299), Optional Torque Sensor Upgrade ($199)
Other:
Locking Removable Battery Pack, 1.7 lb 2 Amp Charger, 13 Amp Controller Output
Liz
8 years agoIt makes me feel like I am going down hill both ways! Today when I took it out I thought, wow, this hill will be hard to climb back up again when I come back this way. But when I rode back I felt like I was going downhill for the most part. This was my experience the other day too.
It makes my ride so fun to go fast and not have to work overly hard. If I was in really good shape it would still be a lot of fun and I could go faster I bet. Without the pedal assist, I would have to get off the bike to go up a hill because I am not in super good shape. It gets me out to cycle and get some exercise while at the same time it makes it fun to ride and makes me look cool. So far I am only going about six miles but I want to work up to longer trips.
I had to take it into the bike shop to get it assembled but it was well worth it to get the brakes tuned exactly right. It is a great buy with a lot of bikes being in this price range or maybe a little more than an annual gym membership. But I prefer to be outdoors for exercise. If you are looking for something to make riding fun, fast and make the hills easy then this is a great bike. I haven’t done any super long, steep hills yet – kind of need more confidence for a longer trip over a mountain pass but it brings the idea into the realm of possibility.
ReplyCourt Rye
8 years agoHi Liz! I enjoyed reading about your experience with the Juiced Bikes CrossCurrent Air. Made me smile… hope it works well for a long time and good luck with that mountain pass goal. Great job getting it setup correctly to start, that will help it last longer and of course, more enjoyable along the way :)
ReplyRob
8 years agoI am really looking hard at this one however really wish I could get even a pre-production model of the hyper fat due to most of the roads in South Louisiana have sub-standard shoulders so looking for beefy tires.
ReplyCourt Rye
7 years agoHi Rob! I agree, the Hyper Fat looks very cool and I’ll be reviewing it at some point… I think that Juiced is double checking the parts, making sure it’s perfect before they really start pushing it :)
ReplyGreg
7 years agoHi Court. First up I love your detailed and informative reviews. Keep up the great work! Question, how would you rate the Air .vs the Cross Current? It will be my first e-bike. I was going to get a refurbished Cross Current but they ran out. Also, what size frame do you recommend for me – Medium or Large? I’m 5’8 – 5’9. Thanks
ReplyCourt Rye
7 years agoHi Greg! I travel all around so the streets range from smooth to very bumpy… so the regular CrossCurrent with suspension would be my first pick. For the price savings, the Air is an excellent deal and I enjoyed testing it. Sounds like we’re the same height so Medium would be a good fit. The frame difference isn’t huge, you could fit a large if you prefer a more leaned-forward body position. I hope this helps :)
ReplyGreg
7 years agoThanks Court. I really appreciate your input. I decided to go with the Cross Current Air. The order is in for the next shipment which should arrive later this month. I’m really looking forward to my first e-bike. I will post my impressions when it arrives.
ReplyCourt Rye
7 years agoAwesome! Thanks for the update Greg, hope it works out well for you and I’ll be excited to hear back :D
ReplyJerry chen
7 years agoI am wondering how they ship the bikes out and how long that process takes?
ReplyCourt Rye
7 years agoHi Jerry, I’ll reach out to the team and see if they can comment (or maybe a customer will chime in). I have no idea how long it takes to be honest with you, and timing may vary depending on which model is chosen and if a shipment is available or coming in.
ReplyBK
7 years agoI can’t speak for other builds, but I ordered this CC Air on May 30th. I read somewhere they were shipping them sometime in June. I received an order confirmation the day I ordered, but no email, status update, or communication has been received since. I’m sure they’re busy and some things take time, but a simple email would set my mind at ease. I’ll be sure to update when the bike arrives.
ReplyCourt Rye
7 years agoThanks BK, I hope they send you an update soon and appreciate your feedback here. Eventually, once you receive the bike, definitely chime in about how you like it and if there are any other details that might help others who are researching the product :)
Cesar Gordillo
7 years agoI’m having the same issue. I ordered my CC Air on July 11th and they will send me the bike by late August. Electronic Bike City is not sending me any status on my order. I wish I would know this before I placed my order. Big letter said delivery in 7 days. This order is taking more time than a car manufacturing.
Court Rye
7 years agoHi Jerry, I reached out to Juiced with your question and they said: “In a box, UPS and about 4 days to Connecticut” so hopefully that holds true and I welcome your ongoing feedback about the product :)
ReplyCesar Gordillo
7 years ago45 days after my order I got this : *We are still waiting for the tracking number on your bike. There have been delays because they have to add racks to some bikes or add fenders and it really slows down the shipment or Fedex just decides to not show up some days. We will send you tracking by email as soon as your order ships out *
Peter Bilton
7 years agoSo the Crosscurrent Air is my second electric bike. The first was an Emazing Artemis, which I absolutely loved, but unfortunately it was stolen. I must say after owning this bike for a week I can understand why they sell out so quick. This bike feels like it was cleverly designed, well constructed, and boy is it fast! It looks stealthy in matte black , and the juiced decal on the down tube looks understated and elegant. My experience out of the box was very good. After putting on the front wheel, handlebar and peddles. I checked the front and rear discs to see if they needed truing up. Both discs were perfectly straight. The brakes will need adjusting, which you can probably do yourself with the allen tool that juiced provides. Watch a Youtube video for instruction on how to adjust the disc brakes. The gears did not require any adjustment. All I need do was lubricate the chain. As I am tall and like a more upright riding position I replaced the stem with a Sunlite adjustable, 125 mm stem. After ordering the bike I was concerned there may not be enough play on the electrical cables to add the stem, but it was no problem. You will also need a bag of 1-1/8 inch spacers. I added 2 x 2.5 mm. I also added an SP12 NCX suspension seat post. You could get by without a fancy suspension seat post, as the 700c x 45c tires do help to absorb road bumps. Inflate the tires to 50 psi, rather than the max 85 psi, for a more comfy ride. The reention battery is a really snug fit and at first i thought Juiced had given me the wrong key as I could not remove the battery. I then realized i didn’t have my battery removing technique down. The best way I found is to ignore the toggle on the battery case. Insert the key with your left hand and grab the top of the battery with your right, giving it a good yank toward you, whilst turning the key to the open position. The battery itself feels solid to hold and there is nothing loose or rattling inside. When you place the battery back on the bike you hear a clunk as it clicks into place and you know for sure its not going anywhere. I have the 11.6 ah battery. My commute is a 12 mile round trip which hardly touches the capacity of this battery. I also like the fact that the throttle overrides peddle asist regardless of which peddle asist level you are in. With my Artemis you had to be in asist level 5 to use the throttle which meant taking your eyes off the road to make the adjustment, not so with the Crosscurrent Air.
ReplyPeter Bilton
7 years agoJust to add to my comments about raising the hight of the handlebars on the Crosscurrent Air for tall riders, and, or those who like a more upright riding position. Today I changed the Promax handle bar for an Atomlab pimplite 3 inch riser bar. So the original hight of the handle bars was 41.5 inches. With the riser stem and 3 inch riser bar the hight is now 48 inches. But that’s it folks, there is no more length on the electrical cables to go any higher. However that is the perfect hight for me at 6 feet 1 inch, 33 inch inseam.
ReplyCourt Rye
7 years agoVery cool, thanks for sharing this Peter! I linked to the bar you mentioned, which color did you get? I really appreciate the tip about how the wires won’t go any further. That’s the kind of detail that is very easy to overlook when you’re excited and shopping online for solutions ;)
ReplyPeter Bilton
7 years agoYou’re welcome Court. I figured I owe it to you for pointing me in the right direction, and to Juiced Bikes for a great product. I got the handle bar in black. The Atomlab Pimplite is about 2 inches longer and is slightly more swept back than the stock handle on the bike. I was fortunate in that the brake levers were too close to the end of the handle bar. That gave me about 4 extra inches of play after moving the brake levers back on the new handle bar. Aside from the handle bar and stem I have also added the Planet Bike Versa rack from Juiced Bikes and the SP 12 NCX suspension post. I plan to add schwalbe Marathon plus tires and Spank Spoon 110 peddles.
dan
7 years agoWas the model you were riding the 17.5″ or 19″ frame? I was looking to purchase the step through model but it’s not in stock. Wondering if you were able to stand over the frame comfortably or not. Thanks for the awesome content!
ReplyCourt Rye
7 years agoHi Dan, I don’t remember exactly which model is shown on film but I believe it was the Large because that is what my pictures show. In any case I did measure each of the two high-step models as follows: High-Step Medium: 30″ Stand Over Height, High Step Large: 31″ Stand Over Height.
I’m 5’9″ with a ~31.5 inseam and believe that either of the two models would have worked but it was probably the Large. There’s only an inch of difference between the two after alland I measure stand over height from just in front of the saddle nose for what a real-life bar height would be vs. down by the seat tube where it’s often lower. I hope this helps you and am sorry that I cannot guarantee for certain which I had.
ReplyClement tsang
7 years agoHeya,
Update: The Juiced Crosscurrent Air is now $1,195, but comes with a 500w motor.
Also, could you do a review on the Crosscurrent S?
Best, Clem
ReplyCourt Rye
7 years agoHi Clem! I’d love to review the CrossCurrent S, will definitely be keeping an eye out for it and I appreciate your feedback on the price changes :)
Replymike rohfeld
7 years agoHello Court,
I’ve decided to purchase my first E bike and really want to thank you for all of your reviews. They have been extremely informative and very helpful in learning about ebikes. The last time I owned a bike was several years ago and I don’t recall ebikes existing back then.
I’ve since learned a lot about different features and so far, I am leaning toward the Cross Current Air, mostly because of the features and its price point which is really at the max of my intended purchase price.
I live in Orange County and will plan to visit Sam at some point in the near future. I called him last week to see if he had one of the CC Airs in stock (new or used) but he didn’t and the Juiced website looks like they are backordered, presumably because of their popularity?
My question however has to do with something I’ve not seen so far. With ebikes becoming more and more popular, there seems to be a growing market for used ebikes. I’m looking for information or a guide on purchasing a used ebike. I called one shop and they only had a 30 day warranty which isn’t enough for me, given the cost.
Have you written or are there any guides or places you can recommend discussing what considerations to consider in purchasing a used ebike?
Also, in looking for an ebike (either new or used) at around the $1000 range, are there any brands you can recommend? In going through your reviews, most of the bikes in that price range are made by either start up companies or offered over the web which is something I don’t want to do..
Any advice you can give regarding purchasing used bike or a new bike at that price will be most appreciated and I’m sure appreciated by others. BTW – I’m looking to purchase the bike for recreation only, mostly trails and bike paths, no off road use and not for commuting.
Thank you again Court, I really appreciate your help and all the advice you’ve given…
ReplyMike
Court Rye
7 years agoHi Mike! If I were in your position, I would try to add a bit more money to your budget and then go to Sam’s shop to see if there are any last-year models that could be on sale. I have seen some great deals on Haibikes in particular and feel that their drive systems are very reliable. The CrossCurrent Air is indeed back ordered (the last time I checked with Tora) and that’s a reflection of the value and quality + support that they offer. I am always careful when buying a used electric bike because it can be difficult to tell how many charge cycles the battery has been through and a replacement can be $600+ often $800 for a Bosch battery. I realize these things can be expensive… I wish there was more I could offer you, but there is a used section of the EBR forums and I think Craigslist can also be worth exploring, especially in your area, California has a lot of electric bikes because of population density, weather, and wealth in some areas :)
ReplyTroy Kimberlin
7 years agoHi – does the battery lock into place with a key? How do you keep it from getting stolen when parked?
ReplyCourt Rye
7 years agoHi Troy! Yes, the battery locks to the frame and I have a picture of it if you scroll through to the third image above. You can see where the battery interfaces in the downtube and the silver circle there near the top (on the left side of the frame) this is what keeps it from getting stolen and keeps it secure in place :)
ReplySteve
7 years agoWhat size is this bike used for the review, medium, large?
Replycourt
7 years agoHi Steve! I think it was the high-step in size Large. If you look closely at the bottom portion of the seat tube in the third picture (where I’m focusing on the battery pack) you can see an L stamped on the frame. I listed out measurements for all of the frame sizes because I think we had several on hand! Hope this helps, I’m 5’9″ tall and have a 31″ inseam, I weigh ~135 lbs :)
ReplyMitchell Davis
6 years agoI have owned a few electric bicycles. I normally prefer the cheaper models without the torque sensor. I have an expensive Haibike which I don’t ride very much because I am in bad shape and the torque sensor makes me put forth a decent amount of exercise which makes long bike rides difficult. I was interested in purchasing a Juiced bike when coincidentally I saw someone my daughter knew riding this same model at the park. I took it for a brief ride up a hill and was very impressed by the power. I just ordered one from Juiced for only $1,000. I am hoping to one day get in shape, but for now I will need this bicycle for my longer rides.
Replycourt
6 years agoSweet! Thanks for sharing your insights about cadence sensors vs. torque sensors and the level of effort required to ride your Haibike vs. something like the CrossCurrent. Hope your ebike arrives soon and is a ton of fun! Feel free to post another comment here as you spend more time with the bike :D
ReplyAnup
6 years agoGreat review! I checked the website, it says high definition cadence sensor by default and upgradable to torque sensor.
ReplyCourt
6 years agoOh, cool! I remember talking to them and seeing the different sensors when we were looking at another bike. Thanks for sharing those details, Anup! I’m a fan of the torque sensor design because of my sensitive knee, it starts a bit faster from zero without as much effort :D
ReplyCesar A Gordillo
6 years agoI don’t know if this happened to anybody else but I recommend to pay extra and take your new bike to your local bike shop to make sure everything is assembled correctly. After few months of usage, I had an accident due to the seat which main bolt broke in half while riding it. I’m glad I wasn’t riding too fast.
Juiced Bikes sent me a new seat, but the rear wheel got unaligned. I thought the spokes were bended, but after taking the bike to the bike shop they told me it was the rim and some spokes. Juiced Bikes don’t have wheels in stock so they sent me a new rim, but they don’t want to pay for the spokes and the installation.
ReplyCourt
6 years agoHi Cesar, thanks for the update and advice. I’m glad you’re okay after the seat bolt incident… I usually do work with local shops to get my bikes assembled and tuned up. Even with good experience building, it’s nice to have a second person taking a look and using the appropriate tools to get everything setup right, it will help the bike last longer too.
Reply